skinning 2-stroke pipe.

Post anything about MX Simulator here. Please. I'm begging you.
zane
Posts: 245
Joined: Wed Apr 02, 2008 9:56 am

skinning 2-stroke pipe.

Postby zane » Wed Apr 02, 2008 10:11 am

hi guys,

my names zane and ive had the demo version of this game and i'll probably buy the game soon.

i was tinkering with a downloaded version of the yz125 hurricane ( i give credits to whoever made it and will only use it for personal use).

and i have made a pro taper bar pad which looks mad in-game and im messing around with a few other things.

I was just wondering if anybody knows where to find the part for the skining of the pipe.

ive uploaded a picture of the skin, so its easier for you guys to understand.

cheers

zane
Attachments
yz125 pic.jpg
(196.58 KiB) Downloaded 909 times
Image

User avatar
DJ99X
Posts: 15513
Joined: Tue Jan 15, 2008 11:36 am
Location: Land Down Under

Re: skinning 2-stroke pipe.

Postby DJ99X » Wed Apr 02, 2008 10:35 am

http://mxsimulator.com/models/

They are large files, and is only half of the layout (need to get suspension and stuff of the crf250 skin). Heres the whole yz125 layout i've put together

http://i32.photobucket.com/albums/d37/D ... 5Frame.jpg

Just put that over your picture and reduce the opacity to see where your putting stuff

zane
Posts: 245
Joined: Wed Apr 02, 2008 9:56 am

Re: skinning 2-stroke pipe.

Postby zane » Wed Apr 02, 2008 10:42 am

your a life saver mate,

but which part on that wiremap is the expantion chamber?

cheers :mrgreen:
Image

gordy
Posts: 1099
Joined: Sat Jan 19, 2008 6:43 am
Team: Privateer
Location: Bathurst, Australia
Contact:

Re: skinning 2-stroke pipe.

Postby gordy » Wed Apr 02, 2008 11:15 am

the best way to figure out stuff like this is to colour a bit of the wireframe bright green, then use the skin ingame and see what part it has altered, then you will get to learn what goes where and what all the bits and pieces are.
Image

instupitious.

User avatar
DJ99X
Posts: 15513
Joined: Tue Jan 15, 2008 11:36 am
Location: Land Down Under

Re: skinning 2-stroke pipe.

Postby DJ99X » Wed Apr 02, 2008 8:29 pm

Its the bit under the right-side number plate

rgaede
Posts: 765
Joined: Fri Mar 07, 2008 3:30 am
Team: Privateer
Location: Albuquerque, NM
Contact:

Re: skinning 2-stroke pipe.

Postby rgaede » Thu Apr 03, 2008 4:09 am

Nice job on the bar pad there zane. Wanted to put one in when I created it, but I have problems with bar pads, as you can see from the simple one on my cr.

Hey DJ, do you also have the full wire frame for the KX 125 and CR125, would like to make a CR from scratch, and have a few ideas for the KX. The wire frames in the models thread don't have the suspension.
Rgaede Past numbers #333 #19 Now #373

DILLIGAF

User avatar
DJ99X
Posts: 15513
Joined: Tue Jan 15, 2008 11:36 am
Location: Land Down Under

Re: skinning 2-stroke pipe.

Postby DJ99X » Thu Apr 03, 2008 4:37 am

You have to open up the crf250 layout to get the suspension etc. Ive uploaded the kx125, only cos I already made it, but you can put the cr125 together yourself. -

Image

rgaede
Posts: 765
Joined: Fri Mar 07, 2008 3:30 am
Team: Privateer
Location: Albuquerque, NM
Contact:

Re: skinning 2-stroke pipe.

Postby rgaede » Thu Apr 03, 2008 4:49 am

Thnks much
Rgaede Past numbers #333 #19 Now #373

DILLIGAF

rgaede
Posts: 765
Joined: Fri Mar 07, 2008 3:30 am
Team: Privateer
Location: Albuquerque, NM
Contact:

Re: skinning 2-stroke pipe.

Postby rgaede » Thu Apr 03, 2008 5:02 am

sry about the double post, but the crf doesn't have the susp either from that link, or at least I'm not getting it from that one, tried all of the tga files. I'll get it off your kx wire frame though, thanks again. :D
Rgaede Past numbers #333 #19 Now #373

DILLIGAF

zane
Posts: 245
Joined: Wed Apr 02, 2008 9:56 am

Re: skinning 2-stroke pipe.

Postby zane » Thu Apr 03, 2008 5:19 am

thanks for the help guys, im about to do the stuff. ill let ya know how it turns out. :mrgreen:

cheers
Image

User avatar
DJ99X
Posts: 15513
Joined: Tue Jan 15, 2008 11:36 am
Location: Land Down Under

Re: skinning 2-stroke pipe.

Postby DJ99X » Thu Apr 03, 2008 5:22 am

rgaede wrote: I'll get it off your kx wire frame though, thanks again. :D


Good thinking! :)

zane
Posts: 245
Joined: Wed Apr 02, 2008 9:56 am

Re: skinning 2-stroke pipe.

Postby zane » Thu Apr 03, 2008 10:47 am

ok it turned out crap!......... NOT! :mrgreen:
Attachments
7.jpg
control!
(671.4 KiB) Downloaded 745 times
3.jpg
the gates
(487.65 KiB) Downloaded 737 times
1.jpg
power band wheelie
(593.11 KiB) Downloaded 730 times
Image

zane
Posts: 245
Joined: Wed Apr 02, 2008 9:56 am

Re: skinning 2-stroke pipe.

Postby zane » Thu Apr 03, 2008 10:49 am

some more!
Attachments
14.jpg
aimin for the sun
(343.54 KiB) Downloaded 716 times
13.jpg
pro taper usa!
(383.99 KiB) Downloaded 709 times
Image

Joe
Posts: 2961
Joined: Wed Dec 19, 2007 10:17 pm
Team: MXGH
Location: PEI,Canada

Re: skinning 2-stroke pipe.

Postby Joe » Thu Apr 03, 2008 10:56 am

that bike looks really nice good job

zane
Posts: 245
Joined: Wed Apr 02, 2008 9:56 am

Re: skinning 2-stroke pipe.

Postby zane » Thu Apr 03, 2008 11:01 am

thanks ive only had skinning experiance on mcm2 but im so happy with how the pipe bar pad and front fender sticker came out.

credit go the the legend who made it.

thanks for the help and appreciation.
Image


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 9 guests