MXS Server remote control application[Release?]

Post anything about MX Simulator here. Please. I'm begging you.
SethEnslowJr
Posts: 8
Joined: Sat Jan 16, 2016 10:00 pm
Team: Young Whipperinos
Location: Finland

MXS Server remote control application[Release?]

Postby SethEnslowJr » Sat Jan 16, 2016 11:26 pm

Too lazy to connect to your server to change the track for your mates? [x]
Tired of python scripts? [x]
.. Maybe this is for you
Image
ANY USE OF THE SOFTWARE IS ENTIRELY AT YOUR OWN RISK!

DOWNLOAD: http://adf.ly/1VJMS1

NOTE: Yes, I do know it's an .EXE. What did you expect, a JPG? Haha.
If you are too afraid to open it, then DO NOT. 8)

So I made this simple app to control my server "remotely*" without launching the actual game.
I bet many of you will find good use for it, so I decided to share it with you. :)
*It will only work when running on the same PC with the server client. (= 127.0.0.1:19800) :oops:

Every function is pretty self-explanatory, but instructions will follow;

How to & DIY
--------
Chapter 1: Installation
1. Add a new line containing " --xcmd-password 123" to your server args file.
PotatoeTip1: Default location of server args file is your MXS server root folder.*
PotatoeTip2: ONLY password 123 will work with this application. Don't worry, your server client will ignore commands from remote addresses.*


1.1 Set your port to 19800. If you are unable to use this port, your bad, haha. I was too lazy to place extra text boxes.
2. Save changes your server args file.
3. Launch your server client.
**If you get any errors:
**Please make sure you have the latest version of MXS Server.
**Check if you accidently left your server running. Two instances can't run at the same time.
**If none of these work, use the .... google. :mrgreen:

4. Open up XCMDRC.exe
5. And you're ready!
----------
Chapter 2: Functions

[Broadcast presence] = Just sends a few broadcast messages to let everyone on the server know you are in control. (remotely, like a 8) )

[Set next track] = Same as "Server,Nexttrack". After this command you have to restart the server client inorder to actually play the track.

[Restart server client] = Same as "Server,Restart". This button will restart your server.

[Broadcast!] = Same as "Server,broadcast". This button will broadcast the text written in the box on your server.
Example: Happy Halloween! :arrow: [Broadcast!]

[Command!] = Same as "Server,"your_command"". Let's you type your own commands. Useful for executing scripts etc.
Example for potatoes: kick <slot number> :arrow: [Command!]


Mobile version that'll work from remote IP's will be released when I am bored and out of money next time. :roll:
And yes, IP, port and stuff will be configurable to suit every user.

Meanwhile, enjoy this one! :wink:

SethEnslowJr
Posts: 8
Joined: Sat Jan 16, 2016 10:00 pm
Team: Young Whipperinos
Location: Finland

Re: MXS Server remote control application[Release?]

Postby SethEnslowJr » Sun Jan 17, 2016 12:46 pm

How can I edit this post?

I now have the listener so it can be used from remote IP address.. :!:

SethEnslowJr
Posts: 8
Joined: Sat Jan 16, 2016 10:00 pm
Team: Young Whipperinos
Location: Finland

Re: MXS Server remote control application[Release?]

Postby SethEnslowJr » Sun Jan 17, 2016 1:08 pm

Well, I don't know how to edit my original post so here goes a new one:
DOWNLOAD: http://adf.ly/1VLLVZ
Main client:
Image
Listener:
Image
How it works so you can install and troubleshoot with full awareness:
Image

New how to & DIY
--------
NOTE: XCMD_listener is using port 19820, so make sure you have your router set up properly.

Chapter 1: Installation for remote use:

1. Add a new line containing " --xcmd-password 123" to your server args file.
PotatoeTip1: Default location of server args file is your MXS server root folder.
PotatoeTip2: ONLY password 123 will work with this application.

2. Save changes your server args file.
3. Launch your server client.
4. Copy XCMDRC_listner.exe to the PC hosting your MXS Server
5. Open XCMDRC_listner.exe on your MXS Server host PC
6. Open XCMDRC_v2.exe on your remote PC that you will use to control the server.
7. Define [IP Address] and [Port] fields. Leaving these empty will only cause pain and suffer.
8. You're done, enjoy! :-)

---------
Chapter 2: Installation for local use
1. Add a new line containing " --xcmd-password 123" to your server args file.
2. Save changes your server args file.
3. Launch your server client.
4. Open XCMDRC_v2.exe
5. Define [IP Address] and [Port] fields.
6. You're done, enjoy! :-)


----------
Chapter 2: Functions

[IP Address] = If used on the same IP with the server client, write your local IP Here. (=127.0.0.1 etc.) If you are using XCMDRC_listener, paste your MXs Server host PC's IP (whatsmyip.org)
[Port] = Write your server's port here. If you are using the XCMDlistener, use "19820"
[Broadcast presence] = Just sends a few broadcasts to let everyone on the server know you are in control. (remotely, like a 8) )
[Set next track] = Same as "Server,Nexttrack". After this command you have to restart the server client inorder to actually play the track.
[Restart server client] = Same as "Server,Restart". This button will restart your server.

[Broadcast!] = Same as "Server,broadcast". This button will broadcast the text written in the box on your server. Example: Happy Halloween! -> [Broadcast!]
[Command!] = Same as "Server,your_command". Let's you type your own commands. Useful for executing scripts and stuff. Examples for potatoes: kick <slot number> [Command!]

That's about it. :shock:

SethEnslowJr
Posts: 8
Joined: Sat Jan 16, 2016 10:00 pm
Team: Young Whipperinos
Location: Finland

Re: MXS Server remote control application[Release?]

Postby SethEnslowJr » Mon Jan 18, 2016 5:42 pm

Image
And finally version with custom password option. :shock:
Download: http://adf.ly/1VPLj5

tinxodiego
Posts: 13
Joined: Wed Aug 26, 2015 11:36 pm
Team: FACTORY PRIVATEER

Re: MXS Server remote control application[Release?]

Postby tinxodiego » Sat Oct 21, 2017 11:16 pm

hi, i have been looking for something like this for a while, but the download links dont work!
can you please upload a new link?
thanks in advance.
I'm the fastest rider out there, but man im so inconsistent you will lap me in the 2nd lap

Bobber113
Posts: 71
Joined: Mon Sep 26, 2016 8:02 am

Re: MXS Server remote control application[Release?]

Postby Bobber113 » Mon Nov 13, 2017 10:44 am

Please could you update the links been looking for something like this for a while


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 7 guests