YOUR SETUP

[Scotty226]

250f and 125 setups should be the same... And stop asking for setups, its fucking annoying and make your own. Its not hard and only takes about 30mins of testing

[motokid499]

250f and 125 setups should be the same... And stop asking for setups, its fucking annoying and make your own. Its not hard and only takes about 5000000000 hours of testing

fixed it Making setups takes Foreverrrr! Ive FINISHED 2 in my 1 and a half years of mxs.

[ryanmx25]

This setup has already bin quted twice any new ones that are good for whoops and get traction.

lowering shock spring rate, compression, and a higher shock rebound will help in whoops

[ryanmx25]

450 Suspension I ran for Dallas EMF
front_sprocket_adjustment=-1.000000
rear_sprocket_adjustment=1.000000
fork_compression_adjustment=94.000000
fork_rebound_adjustment=85.000000
fork_spring_rate_adjustment=82.000000
fork_preload_adjustment=68.000000
fork_oil_level_adjustment=100.000000
shock_compression_adjustment=62.000000
shock_rebound_adjustment=76.000000
shock_spring_rate_adjustment=30.000000
shock_preload_adjustment=35.000000
rider_yspring=88.000000
rider_ydamping=60.000000
rider_zspring=90.000000
rider_zdamping=38.000000
rider_mass_distribution=0.470000

250 Dallas Rf
front_sprocket_adjustment=-1.000000
rear_sprocket_adjustment=1.000000
fork_compression_adjustment=89.000000
fork_rebound_adjustment=85.000000
fork_spring_rate_adjustment=82.000000
fork_preload_adjustment=68.000000
fork_oil_level_adjustment=100.000000
shock_compression_adjustment=52.000000
shock_rebound_adjustment=76.000000
shock_spring_rate_adjustment=30.000000
shock_preload_adjustment=35.000000
rider_yspring=88.000000
rider_ydamping=60.000000
rider_zspring=100.000000
rider_zdamping=40.000000
rider_mass_distribution=0.470000

[slowngreen]

This is my every terrain 250f setup, works great for me...BUT, I am trying to get into 450's, this setup works great for me except for one thing, alot of times I'll get the back end to hop up, not high at all usually, then ride the front wheel with no control until it dumps to the side, as well as knifing it in corners alot easier too. Any ideas? I never had this trouble when dialing in a setup for 250's. So Im not sure what do start with.

Suspension in order.
75
44
70
30
75
60
90
35
42

ADV.
28
48
75
5
22
100
730
1
40

Rider
64
55
64
50
.39

[LEKURDEE]

[quote="ryanmx25"]450 Suspension I ran for Dallas EMF
front_sprocket_adjustment=-1.000000
rear_sprocket_adjustment=1.000000
fork_compression_adjustment=94.000000
fork_rebound_adjustment=85.000000
fork_spring_rate_adjustment=82.000000
fork_preload_adjustment=68.000000
fork_oil_level_adjustment=100.000000
shock_compression_adjustment=62.000000
shock_rebound_adjustment=76.000000
shock_spring_rate_adjustment=30.000000
shock_preload_adjustment=35.000000
rider_yspring=88.000000
rider_ydamping=60.000000
rider_zspring=90.000000
rider_zdamping=38.000000
rider_mass_distribution=0.470000

what's your advenced for 450 please ?

[yzmxer608]

Why would it be any different from the other bikes? The only thing you should have to change between classes is suspension.

[ryanmx25]

What yzed said, my advanced never changes for sx/mx or bikes

[LEKURDEE]

ok thanks

[oscarhardwick]

Thanks to the guys posting some setup values in this thread. For a newcomer like me having some tested proven values to play about with and get comfortable with has been invaluable.

- Oscar.

[ty casey]

can some one post a mx and sx 125 setup please.

[jason_pama]

can some one post a mx and sx 125 setup please.

250f and 125 setups should be the same... And stop asking for setups, its fucking annoying and make your own. Its not hard and only takes about 30mins of testing

[ty casey]

if the track is really bumpy like an out door what should i adjust idk if i should make it stiffer or softer i think softer would be the key but then i bottom out does any one have any tips for bumpy tracks like Daytona i swap a lot and i don't know what to change.

[Scotty226]

use a nationals suspension with slightly stiffer forks

[ty casey]

No has posted a nationals setup for a wile now tho?