tileinfo info

User avatar
Brock1198
Posts: 211
Joined: Tue Jan 13, 2015 12:20 am
Team: Cycleworks
Location: Texas

Re: tileinfo info

Postby Brock1198 » Mon Dec 18, 2017 9:52 pm

https://www.facebook.com/Vannmartin421/ ... 561959484/ a local pro from the houston area on one. kinda shows how grippy they are
cone cone cone cone, CONE CONE? coooonnnneeee

barrington314
Posts: 6309
Joined: Fri Feb 18, 2011 6:03 pm
Team: me
Location: Charleston, SC

Re: tileinfo info

Postby barrington314 » Thu Jan 18, 2018 4:39 pm

If the launch pad subject ever wants to get touched on again, heres a pretty good video I think, with legit pads and legit riders.
https://www.instagram.com/p/BeGPlkGhKbb/?taken-by=mxgp

barrington314
Posts: 6309
Joined: Fri Feb 18, 2011 6:03 pm
Team: me
Location: Charleston, SC

Re: tileinfo info

Postby barrington314 » Thu Feb 22, 2018 5:14 am

jlv wrote:
erode_limit <depth> <limit> <inner limit>
This sets the erode limit at a specific depth. When the track is worn to the specified depth, the depth and inner depth will be multiplied by the limit and inner limit respectively. When between depths it will interpolate. Default is 1 1 at depth 0 and 0 0 at depth 1.



Will you help me understand this a little better please?
First, is this the default settings as you have mentioned above?
erode_limit 0.0 1.0 1.0
erode_limit 1.0 0.0 0.0

First number is the depth? So, here we have a depth range of 0 and 1 foot? Does this have any relation to the erode_depth setting? It sounds like maybe between the 0 and 1, the first 1 foot of depth, it'll interpolate. After that it'll erode at a fixed value until it reaches erode_depth?
Can you give me like a real working example of how changing each number would make the erode different? Please.

jlv
Site Admin
Posts: 12567
Joined: Fri Nov 02, 2007 5:39 am
Team: No Frills Racing
Contact:

Re: tileinfo info

Postby jlv » Fri Feb 23, 2018 3:31 am

The first number tells it when to use that setting. If the track is worn 1 foot below the original height, it will use the line where <depth> is 1. The second and third numbers scale erode_depth and erode_inner_depth.

You have the default correct. That will gradually reduce erode_depth and erode_inner_depth to 0 as the track reaches 1 foot underground. Should be something like dirt that gets progressively harder until becomes concrete at 1 foot deep.

If you want it to be unaffected for the first foot and then suddenly hit a hard concrete layer, try this:

erode_limit 0.0 1.0 1.0
erode_limit 0.9 1.0 1.0
erode_limit 1.0 0.0 0.0

Going the other way, if you want a hard layer that gets softer as it breaks through, maybe something like mud that's dried out on the surface, try this:

erode_limit 0.0 0.25 0.25
erode_limit 0.25 1.0 1.0
Josh Vanderhoof
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.

barrington314
Posts: 6309
Joined: Fri Feb 18, 2011 6:03 pm
Team: me
Location: Charleston, SC

Re: tileinfo info

Postby barrington314 » Fri Feb 23, 2018 6:26 pm

Im having a hard time getting the erode to stop. I've set both erode depth values to 0.5 and then I have this:

erode_limit 0.0 1.0 1.0
erode_limit 0.4 1.0 1.0
erode_limit 0.5 0.0 0.0

So, shouldn't that stop erode dead in its tracks at 1/2 a foot? It just keeps going for me.

jlv
Site Admin
Posts: 12567
Joined: Fri Nov 02, 2007 5:39 am
Team: No Frills Racing
Contact:

Re: tileinfo info

Postby jlv » Sat Feb 24, 2018 1:21 am

It only tests the depth directly under the wheel. It can go deeper than the limit because the radius will affect neighboring areas that might already be under the limit. Shouldn't get too far though. How deep is it going?
Josh Vanderhoof
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.

barrington314
Posts: 6309
Joined: Fri Feb 18, 2011 6:03 pm
Team: me
Location: Charleston, SC

Re: tileinfo info

Postby barrington314 » Sat Feb 24, 2018 2:13 am

The ground was completely flat, 0.00. It went as deep as 0.75ish. But was too bumpy for me to keep hitting the same line. I'll have to test it more to see if it would have gone deeper. I did have erode set on 50 (going for quick testing :oops: ), maybe that could be why, not as accurate?

jlv
Site Admin
Posts: 12567
Joined: Fri Nov 02, 2007 5:39 am
Team: No Frills Racing
Contact:

Re: tileinfo info

Postby jlv » Sun Feb 25, 2018 2:05 am

A big erode setting might make it worse but the real reason is because it checks the spot under the wheel, and then lowers the entire radius. (Obviously, less at the edges but you know what I mean.) So if you dig at one spot to put it under .5, then go 2 feet to the side and go again, it'll put it below the limit if the radius is over 2 feet. Probably would have been nicer to test at each point in the height map but this way was faster and easier.
Josh Vanderhoof
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.


Return to “Tutorials”

Who is online

Users browsing this forum: No registered users and 1 guest