Erode online
-
- Posts: 6614
- Joined: Fri Feb 18, 2011 6:03 pm
- Team: me
- Location: Charleston, SC
Re: Erode online
Everyone requesting restart during qualifying sessions after lap 2.
JLV, can tileinfo change after erode has gone a specific depth? I want it to be slippery when we get done to the ply wood in SX.
JLV, can tileinfo change after erode has gone a specific depth? I want it to be slippery when we get done to the ply wood in SX.
Re: Erode online
That means track creators doesn`t have to worry about people complaining about it beeing too rough or too smooth, but rather how the ruts are forming.
Think stock tracks may be more interesting for others than stock track heros if we get this.
Think stock tracks may be more interesting for others than stock track heros if we get this.
-
- Posts: 1267
- Joined: Sat Jul 10, 2010 9:21 am
- Team: MotoRAD
- Location: The Nederlands
Re: Erode online
How will the transition between tileinfos be? For example from a hard packed erode to sand. Will this make a sharp edge or will it be smooth?
I know I can test it with the current erode, just too lazy to do it atm.
I know I can test it with the current erode, just too lazy to do it atm.
2013 EMF outdoors 2nd place overall
2013 MxSCentral outdoors 2nd place overall
2012 EMF outdoors 2nd overall
2012 SMA sx 2nd overall
2011 SMA outdoors champion
2013 MxSCentral outdoors 2nd place overall
2012 EMF outdoors 2nd overall
2012 SMA sx 2nd overall
2011 SMA outdoors champion
-
- Posts: 6614
- Joined: Fri Feb 18, 2011 6:03 pm
- Team: me
- Location: Charleston, SC
Re: Erode online
Yup. We have heard it all about traction. Now we get to hear complaining about erode settings.02RR02 wrote:That means track creators doesn`t have to worry about people complaining about it beeing too rough or too smooth, but rather how the ruts are forming.
Think stock tracks may be more interesting for others than stock track heros if we get this.
Re: Erode online
My guess is that we will have very little influence on the ruts and rough of the tracks anymore.barrington314 wrote:Yup. We have heard it all about traction. Now we get to hear complaining about erode settings.02RR02 wrote:That means track creators doesn`t have to worry about people complaining about it beeing too rough or too smooth, but rather how the ruts are forming.
Think stock tracks may be more interesting for others than stock track heros if we get this.
Maybe a few starter ruts (very small). And small rough that will develop in.
Its going to be interesting for sure.
Also presents a new challenge creating overlays. JLV said anything AO wise would have to been done in the shadows file.
Not sure how detailed I can get with that.
Re: Erode online
It can't do that now at least. For a stadium floor an underground statue with a plywood texture would be better anyway since it'd show through when you hit it. Another spot where mesh collisions would be nice, although for the floor you could use an extremely large sphere since nothing has to pass under it.barrington314 wrote:JLV, can tileinfo change after erode has gone a specific depth? I want it to be slippery when we get done to the ply wood in SX. :wink:
It's a sharp edge, but you're free to smooth it out with blended tiles. E.g. 10% sand 90% clay, 20% sand 80% clay and so on. You have 256 tiles to work with so it should be possible to make a smooth transition if you want to put the work into it. As far as traction goes, sharp transitions don't seem to be a big problem in practice.Sandhapper wrote:How will the transition between tileinfos be? For example from a hard packed erode to sand. Will this make a sharp edge or will it be smooth?
I know I can test it with the current erode, just too lazy to do it atm. :|
Josh Vanderhoof
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
-
- Posts: 1267
- Joined: Sat Jul 10, 2010 9:21 am
- Team: MotoRAD
- Location: The Nederlands
Re: Erode online
Sounds good. Will more tiles cause more lagg?jlv wrote:It's a sharp edge, but you're free to smooth it out with blended tiles. E.g. 10% sand 90% clay, 20% sand 80% clay and so on. You have 256 tiles to work with so it should be possible to make a smooth transition if you want to put the work into it. As far as traction goes, sharp transitions don't seem to be a big problem in practice.Sandhapper wrote:How will the transition between tileinfos be? For example from a hard packed erode to sand. Will this make a sharp edge or will it be smooth?
I know I can test it with the current erode, just too lazy to do it atm.
I'm also curious if you've done anything to scripting yet?
2013 EMF outdoors 2nd place overall
2013 MxSCentral outdoors 2nd place overall
2012 EMF outdoors 2nd overall
2012 SMA sx 2nd overall
2011 SMA outdoors champion
2013 MxSCentral outdoors 2nd place overall
2012 EMF outdoors 2nd overall
2012 SMA sx 2nd overall
2011 SMA outdoors champion
-
- Posts: 6614
- Joined: Fri Feb 18, 2011 6:03 pm
- Team: me
- Location: Charleston, SC
Re: Erode online
Hey, you said it this time.jlv wrote: Another spot where mesh collisions would be nice
Re: Erode online
More tiles won't affect performance. Nothing done on scripting aside from evaluating some javascript engines.Sandhapper wrote:Sounds good. Will more tiles cause more lagg?
I'm also curious if you've done anything to scripting yet?
Josh Vanderhoof
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Re: Erode online
Broken clavicle + vacation + online erode.
Hmmm.
Maybe it's time for some MXS again...
Hmmm.
Maybe it's time for some MXS again...
-
- Posts: 3603
- Joined: Mon Sep 10, 2012 12:15 am
- Team: PoGo
- Location: Indiana
Re: Erode online
So, my single player erode is not working, and I can't figure out why. Thought maybe I was on a track without erode settings, so I went to stock Red Bud, still didn't work. Thought my settings were too low, so I turned it up from 22 to 100, still nothing.
I have confirmed that I'm using the correct shortcut, so I don't know what my issue is
I have confirmed that I'm using the correct shortcut, so I don't know what my issue is
WAR CRY <3
Sun Burn
-
- Posts: 1267
- Joined: Sat Jul 10, 2010 9:21 am
- Team: MotoRAD
- Location: The Nederlands
Re: Erode online
How are your graphic settings? I think I got mine working by enabling shading settings. Not sure which one though.mxsrider96 wrote:So, my single player erode is not working, and I can't figure out why. Thought maybe I was on a track without erode settings, so I went to stock Red Bud, still didn't work. Thought my settings were too low, so I turned it up from 22 to 100, still nothing.
I have confirmed that I'm using the correct shortcut, so I don't know what my issue is
Still on some tracks it seems to not work for me though. It's weird.
2013 EMF outdoors 2nd place overall
2013 MxSCentral outdoors 2nd place overall
2012 EMF outdoors 2nd overall
2012 SMA sx 2nd overall
2011 SMA outdoors champion
2013 MxSCentral outdoors 2nd place overall
2012 EMF outdoors 2nd overall
2012 SMA sx 2nd overall
2011 SMA outdoors champion
-
- Posts: 3603
- Joined: Mon Sep 10, 2012 12:15 am
- Team: PoGo
- Location: Indiana
Re: Erode online
Well, it's not just the look that isn't updating, I'm not getting any ruts forming after 6 laps
WAR CRY <3
Sun Burn
Re: Erode online
haggqvist wrote:Broken clavicle + vacation + online erode.
Hmmm.
Maybe it's time for some MXS again...
Peters as sharp as a mouse dick-Ol' PizzaChet
Re: Erode online
what's news for that ? :p