Throttle won't go half way

Post your questions here
User avatar
kxalex31
Posts: 993
Joined: Fri Mar 23, 2012 2:35 pm
Location: Baton Rouge, LA
Contact:

Throttle won't go half way

Postby kxalex31 » Mon Mar 06, 2017 12:42 pm

My throttle either goes all or none. It's a Xbox 360 controller. I haven't had it for long. If I hold it down half way my rpm's go all the way up. Wanted to see if there is any codes I could do or anything I could do myself to try to fix this, thanks.
Image

User avatar
Versus-PC_Official
Posts: 139
Joined: Mon Mar 14, 2016 6:58 pm
Team: VersusPC.com
Contact:

Re: Throttle won't go half way

Postby Versus-PC_Official » Mon Mar 06, 2017 2:17 pm

Is it an official Microsoft Xbox 360 controller or is it an off-brand?
Image

User avatar
kxalex31
Posts: 993
Joined: Fri Mar 23, 2012 2:35 pm
Location: Baton Rouge, LA
Contact:

Re: Throttle won't go half way

Postby kxalex31 » Mon Mar 06, 2017 8:35 pm

Versus-PC_Official wrote:Is it an official Microsoft Xbox 360 controller or is it an off-brand?

Official Microsoft one
Image

User avatar
Versus-PC_Official
Posts: 139
Joined: Mon Mar 14, 2016 6:58 pm
Team: VersusPC.com
Contact:

Re: Throttle won't go half way

Postby Versus-PC_Official » Tue Mar 07, 2017 2:42 am

Could you post a screenshot of your config file? Screenshot the part where it shows all your controls.
Image

User avatar
mxsrider96
Posts: 3345
Joined: Mon Sep 10, 2012 12:15 am
Team: PoGo
Location: Indiana

Re: Throttle won't go half way

Postby mxsrider96 » Tue Mar 07, 2017 1:37 pm

If you have that special driver that splits your axes, it will allow for no control over the triggers. Make sure you're using the official Microsoft driver (which should come native on your computer)
WAR CRY <3

Sun Burn

User avatar
kxalex31
Posts: 993
Joined: Fri Mar 23, 2012 2:35 pm
Location: Baton Rouge, LA
Contact:

Re: Throttle won't go half way

Postby kxalex31 » Tue Mar 07, 2017 9:40 pm

mxsrider96 wrote:If you have that special driver that splits your axes, it will allow for no control over the triggers. Make sure you're using the official Microsoft driver (which should come native on your computer)

Yea I do have the split axis' driver installed I didn't know it did that. Thanks man
Image

User avatar
Versus-PC_Official
Posts: 139
Joined: Mon Mar 14, 2016 6:58 pm
Team: VersusPC.com
Contact:

Re: Throttle won't go half way

Postby Versus-PC_Official » Wed Mar 08, 2017 3:32 am

You should be able to have full axis control even with the drivers that split the axis. Im not sure what drivers you used, but when I split my triggers the axis worked fine.
Image

Racers52
Posts: 1957
Joined: Sun Feb 03, 2013 8:10 pm
Team: rF
Location: Arkansas
Contact:

Re: Throttle won't go half way

Postby Racers52 » Wed Mar 08, 2017 5:19 am

Or you could just be like me, all or nothing :mrgreen:

Seriously though, it aint that bad.
Image

CeeJayHDz
Posts: 490
Joined: Mon Feb 23, 2015 5:05 pm
Team: Privateer

Re: Throttle won't go half way

Postby CeeJayHDz » Wed Mar 08, 2017 11:31 am

Or do what i do and don't use left trigger for anything :)
Image

User avatar
kxalex31
Posts: 993
Joined: Fri Mar 23, 2012 2:35 pm
Location: Baton Rouge, LA
Contact:

Re: Throttle won't go half way

Postby kxalex31 » Wed Mar 08, 2017 12:37 pm

Versus-PC_Official wrote:You should be able to have full axis control even with the drivers that split the axis. Im not sure what drivers you used, but when I split my triggers the axis worked fine.

I downloaded the one that Dade did which you can find here viewtopic.php?f=17&t=39872&p=722914&hilit=Split+axis#p722914
Image

User avatar
mxsrider96
Posts: 3345
Joined: Mon Sep 10, 2012 12:15 am
Team: PoGo
Location: Indiana

Re: Throttle won't go half way

Postby mxsrider96 » Wed Mar 08, 2017 3:07 pm

Yeah, I used the XBCD driver for awhile, and then noticed I couldn't roll on to the throttle like I wanted, so I went back to the native driver
WAR CRY <3

Sun Burn

User avatar
kxalex31
Posts: 993
Joined: Fri Mar 23, 2012 2:35 pm
Location: Baton Rouge, LA
Contact:

Re: Throttle won't go half way

Postby kxalex31 » Wed Mar 08, 2017 5:43 pm

mxsrider96 wrote:Yeah, I used the XBCD driver for awhile, and then noticed I couldn't roll on to the throttle like I wanted, so I went back to the native driver

Yea I went back last night and I feel so much smoother than I did with the split axes
Image


Return to “Help / Troubleshooting”

Who is online

Users browsing this forum: No registered users and 1 guest