Page 1 of 1
Throttle won't go half way
Posted: Mon Mar 06, 2017 12:42 pm
by kxalex31
My throttle either goes all or none. It's a Xbox 360 controller. I haven't had it for long. If I hold it down half way my rpm's go all the way up. Wanted to see if there is any codes I could do or anything I could do myself to try to fix this, thanks.
Re: Throttle won't go half way
Posted: Mon Mar 06, 2017 2:17 pm
by Versus-PC_Official
Is it an official Microsoft Xbox 360 controller or is it an off-brand?
Re: Throttle won't go half way
Posted: Mon Mar 06, 2017 8:35 pm
by kxalex31
Versus-PC_Official wrote:Is it an official Microsoft Xbox 360 controller or is it an off-brand?
Official Microsoft one
Re: Throttle won't go half way
Posted: Tue Mar 07, 2017 2:42 am
by Versus-PC_Official
Could you post a screenshot of your config file? Screenshot the part where it shows all your controls.
Re: Throttle won't go half way
Posted: Tue Mar 07, 2017 1:37 pm
by mxsrider96
If you have that special driver that splits your axes, it will allow for no control over the triggers. Make sure you're using the official Microsoft driver (which should come native on your computer)
Re: Throttle won't go half way
Posted: Tue Mar 07, 2017 9:40 pm
by kxalex31
mxsrider96 wrote:If you have that special driver that splits your axes, it will allow for no control over the triggers. Make sure you're using the official Microsoft driver (which should come native on your computer)
Yea I do have the split axis' driver installed I didn't know it did that. Thanks man
Re: Throttle won't go half way
Posted: Wed Mar 08, 2017 3:32 am
by Versus-PC_Official
You should be able to have full axis control even with the drivers that split the axis. Im not sure what drivers you used, but when I split my triggers the axis worked fine.
Re: Throttle won't go half way
Posted: Wed Mar 08, 2017 5:19 am
by Racers52
Or you could just be like me, all or nothing
Seriously though, it aint that bad.
Re: Throttle won't go half way
Posted: Wed Mar 08, 2017 11:31 am
by CeeJayHDz
Or do what i do and don't use left trigger for anything
Re: Throttle won't go half way
Posted: Wed Mar 08, 2017 12:37 pm
by kxalex31
Versus-PC_Official wrote:You should be able to have full axis control even with the drivers that split the axis. Im not sure what drivers you used, but when I split my triggers the axis worked fine.
I downloaded the one that Dade did which you can find here
http://forum.mxsimulator.com/viewtopic. ... is#p722914
Re: Throttle won't go half way
Posted: Wed Mar 08, 2017 3:07 pm
by mxsrider96
Yeah, I used the XBCD driver for awhile, and then noticed I couldn't roll on to the throttle like I wanted, so I went back to the native driver
Re: Throttle won't go half way
Posted: Wed Mar 08, 2017 5:43 pm
by kxalex31
mxsrider96 wrote:Yeah, I used the XBCD driver for awhile, and then noticed I couldn't roll on to the throttle like I wanted, so I went back to the native driver
Yea I went back last night and I feel so much smoother than I did with the split axes