Pipe command

[Yokel]

Would it be possible to make the pipe command permanent or apply to everybody, cs ofc

[jlv]

Yes, you have to override these files.

==> default250.braap <==
pipe 4.0 2.0 0.0 0 15
soundtable @default250.soundtable
minrpm 1687

==> default450f.braap <==
pipe 4.0 2.0 0.0 0 15
soundtable @default450f.soundtable
minrpm 1404

==> default125.braap <==
pipe 1.75 0.1 0.0 0 15
minrpm 1500
soundtable @default125.soundtable

==> default250f.braap <==
pipe 4.0 2.0 0.0 0 15
soundtable @default250f.soundtable

[Yokel]

If you don't mind what would for example pipe 5 and where would i put the file?

[Yokel]

For above 450f btw. also how would i name the .braap and what would it look like inside sorry if im being dumb

[Yokel]

realized im dumb for the pipe 5 example the text that goes in the braap file

[jlv]

For above 450f btw. also how would i name the .braap and what would it look like inside sorry if im being dumb

For a 450 you'd make a file named "default450f.braap" containing this text:

pipe 4.0 2.0 0.0 0 15
soundtable @default450f.soundtable
minrpm 1404

The numbers are <pipe length> <muffle length> <amp> <first> <last>. I believe pipe length sets the overall delay, muffle length sets how far the delays are spread apart, amp is the amplitude, and first and list control which of the 16 delays you're setting.

[Yokel]

Thanks a lot