MXS Pixel Mapper for Track Makers

[ddmx]

I really apologize for that. I only made the update to the statues code, not the billboards or anything else. Expect it tonight.

[ddmx]

-Accurately writes statues, billboards, and decals.
-Added some dummy proofing
-Start gates section disabled

http://www.mediafire.com/?3uya5fqxk810slo

Hopefully I can leave this be for another 2 years now.

[VMX_SKYmx99]

Thanks man! I actually tried it on statues after I posted that and had the same problem. I will try this one soon.

[ddmx]

I tested it on 1 track with a scale of 0.8. I figured if it worked on that track that it should be fine. I didn't do extensive testing by any means.

[mxchild]

Nearly 2 years, Took 20 minutes to correct

same thing this time ddmx?

[ddmx]

No, last time it was tested on a track with a scale of 1. That means I didn't catch the error of not multiplying by the track scale.

[Max1633du16]

For the statues, it don't work :/ I used a 512pixel map

[ddmx]

What is not working? What is your track scale? That's not enough information for me to make informed changes especially when it works on my machine.

[Max1633du16]

So I create my pixel map with a red line around my pixel pistepour placed barriers. Once in the program, I select the folder of my track and then I load my pixel map. I'm a definition for the statue Fence and when I click: write statues it appears to me that mxs pixel map does not take care of this action.

My track is in 2049, my pixel map in 512.

[ddmx]

Does it write the statues just not in the write location or is it not writing the statues at all? Make sure the colors you're using match up exactly with those in the program.

This is actually a good find. It wouldn't be hard to add a feature that detects all the colors you have in your pixel map and populates the drop down based on that.

[Max1633du16]

I use the colour of pixel map(red fff000 i believe), and when I click write statues that put me that the application can not do this action. So it does not write to me at all lines of statues.

[VMX_SKYmx99]

It's still not lining up for me either....

[wheels1758]

David, the placement is mirrored about the line z=x.

[Max1633du16]

No solution DDMX ?

[ddmx]

Thanks wheels! I was using a straight line, lower left to upper right, to test. I probably wouldn't have caught that unless you mentioned it. Simple enough fix but it will have to wait until tomorrow.