Released Track Objects
-
- Posts: 171
- Joined: Wed Dec 07, 2011 6:29 pm
- Team: POGO AH GO GO
- Location: Florida USA
Re: Released Track Objects
Has anyone see like a tower of tires, maybe three or four high? Im trying to find something to put on the inside of my corners in a couple spots to make sure that you can see the edge of the corners.
TwistedMotor dropout | POGO MX recruit hopeful | RF D Class pro | holding it tapped 1st gear
-
- Posts: 2600
- Joined: Sat Feb 12, 2011 4:12 pm
- Team: FlowTech
- Location: New England USA
- Contact:
-
- Crushed Dissenter
- Posts: 3245
- Joined: Thu Feb 16, 2012 8:33 pm
- Team: MotardMatt220
- Location: KTM57
Re: Released Track Objects
Yeah there's loads, I think there's one on the stewart compound.aeffertz wrote:Has anyone made a chain link fence?
As for the guy above with the red bull stuff. I've seen a redbull tent but it was from around 2008 so it's a bit outdated. However there are more up to date tents and starting line backboard which can be re-skinned to that red bull design. Both the tents and backboard can be found on the open GP and AMA folders. Then you can either fin someone to re-skin them or do it yourself.
jlv wrote: Motardmatt220 is a crock of shit
KTM57 wrote: August is 13 years old and thinks he's hot shit because he's a lot younger than everyone else
-
- Crushed Dissenter
- Posts: 3245
- Joined: Thu Feb 16, 2012 8:33 pm
- Team: MotardMatt220
- Location: KTM57
Re: Released Track Objects
Find*
jlv wrote: Motardmatt220 is a crock of shit
KTM57 wrote: August is 13 years old and thinks he's hot shit because he's a lot younger than everyone else
Re: Released Track Objects
If you want the template to the backboard used on the 2014 Nationals let me know, I think it is kicking around on my hard drive somewhere. I should probably release all that stuff with templates but I am lazy hahaha.JT43 wrote:Yeah there's loads, I think there's one on the stewart compound.aeffertz wrote:Has anyone made a chain link fence?
As for the guy above with the red bull stuff. I've seen a redbull tent but it was from around 2008 so it's a bit outdated. However there are more up to date tents and starting line backboard which can be re-skinned to that red bull design. Both the tents and backboard can be found on the open GP and AMA folders. Then you can either fin someone to re-skin them or do it yourself.
Re: Released Track Objects
I found the Stewart Compound one so I'll give that one a shot and see how it looks.SMR 510RR wrote:If you want the template to the backboard used on the 2014 Nationals let me know, I think it is kicking around on my hard drive somewhere. I should probably release all that stuff with templates but I am lazy hahaha.JT43 wrote:Yeah there's loads, I think there's one on the stewart compound.aeffertz wrote:Has anyone made a chain link fence?
As for the guy above with the red bull stuff. I've seen a redbull tent but it was from around 2008 so it's a bit outdated. However there are more up to date tents and starting line backboard which can be re-skinned to that red bull design. Both the tents and backboard can be found on the open GP and AMA folders. Then you can either fin someone to re-skin them or do it yourself.
-
- Crushed Dissenter
- Posts: 3245
- Joined: Thu Feb 16, 2012 8:33 pm
- Team: MotardMatt220
- Location: KTM57
Re: Released Track Objects
I think that's the only one to be honest
jlv wrote: Motardmatt220 is a crock of shit
KTM57 wrote: August is 13 years old and thinks he's hot shit because he's a lot younger than everyone else
Re: Released Track Objects
It works fine, I just wish it wasn't black. I tried making it grey using photoshop but it didn't turn out for some reason.JT43 wrote:I think that's the only one to be honest
I've been trying to figure out how to use Blender but it's a bit confusing for a noob. I'm just trying to make this enclosed barn exactly 3 times bigger.
http://www.mediafire.com/download/324g6 ... Release.7z
Re: Released Track Objects
If you have the obj for it it will be easy in blender. Open the obj, push "s" (scale) then push "3" (3x bigger) then hit CTRL+A to apply the changes (I always just select apply rotation and scale. Then just export to a new JM and you are done.aeffertz wrote:It works fine, I just wish it wasn't black. I tried making it grey using photoshop but it didn't turn out for some reason.JT43 wrote:I think that's the only one to be honest
I've been trying to figure out how to use Blender but it's a bit confusing for a noob. I'm just trying to make this enclosed barn exactly 3 times bigger.
http://www.mediafire.com/download/324g6 ... Release.7z
If you only have the JM then Wheels has a script here to scale JMs without the OBJ http://forum.mxsimulator.com/viewtopic. ... 1&start=75. I have never used it so I wont be of much help there.
Re: Released Track Objects
Made a skin for DJ's fence released in the very first post in this topic. Included jm and norm. It is the same jm as DJ's, just another skin. So credit to him!
>>>Download<<<
>>>Download<<<
Discord: StorkeN#6883 - StorkenMXS Youtube - StorkenMXS Instagram - StorkenMXS Facebook - TMFR on Faceboook
Re: Released Track Objects
I made one, I thought it made it's rounds, I don't mind if you have it but I can't get it to you at the moment. If anyone wants to give it to you, I think a handful of people have it. Otherwise you'll have to wait a week.MX4EVER wrote:It's me making this track, this pic is just a plan. I saw it on Loretta, nice memory !JT43 wrote:Who made that track? Ask them, im sure there's one on Loretta Lynn too
Last thing I need is the "2 - 1 - 3" podium. Ever seen ?
Hi
-
- Posts: 195
- Joined: Tue Jul 24, 2012 11:27 pm
- Team: TwistMoto Racing
- Location: Arizona
- Contact:
Re: Released Track Objects
Do you need it solid, or is it just for looks?aeffertz wrote:Anyone make a barrier like so:
I could probably put one together fairly quick.