2017 Husqvarna Update

Post models and skins here
Forum rules
If your topic doesn't contain a model/skin link, this is the wrong place to post it.
Jeremy150
Posts: 3311
Joined: Mon Jul 30, 2012 9:56 am
Team: MV Films

Re: 2017 Husqvarna Update

Post by Jeremy150 »

That model was not released (FOR FREE) for other people to swap parts and sell it. Not to mention you put parts that were released (FOR FREE) on it.
Image
GuilhermeMX28
Crushed Dissenter
Posts: 128
Joined: Mon Dec 26, 2016 3:47 pm
Team: PowerDream
Location: Brazil

Re: 2017 Husqvarna Update

Post by GuilhermeMX28 »

Jeremy150 wrote:That model was not released (FOR FREE) for other people to swap parts and sell it. Not to mention you put parts that were released (FOR FREE) on it.
Has a select few parts of people in this community who still do not know how to change a part of the bike, you are a great modeler, but everyone is not the same you, who does not want to change all the pieces, just buy my update and use it! I want you to understand that!
Guilherme Cabral | PowerDream Owner | #131 | 250 AM rF | 3rd Keytone Supercross novice class
Image
Tbonemx428
Posts: 222
Joined: Mon Oct 07, 2013 12:10 am

Re: 2017 Husqvarna Update

Post by Tbonemx428 »

GuilhermeMX28 wrote:
Jeremy150 wrote:That model was not released (FOR FREE) for other people to swap parts and sell it. Not to mention you put parts that were released (FOR FREE) on it.
Has a select few parts of people in this community who still do not know how to change a part of the bike, you are a great modeler, but everyone is not the same you, who does not want to change all the pieces, just buy my update and use it! I want you to understand that!
You don't understand why we're laughing about you charging.
Your taking FREE parts, from FREE models and moving them around, and then CHARGING people to release the full thing that took you all of 10 minutes to do.
GuilhermeMX28
Crushed Dissenter
Posts: 128
Joined: Mon Dec 26, 2016 3:47 pm
Team: PowerDream
Location: Brazil

Re: 2017 Husqvarna Update

Post by GuilhermeMX28 »

Tbonemx428 wrote:
GuilhermeMX28 wrote:
Jeremy150 wrote:That model was not released (FOR FREE) for other people to swap parts and sell it. Not to mention you put parts that were released (FOR FREE) on it.
Has a select few parts of people in this community who still do not know how to change a part of the bike, you are a great modeler, but everyone is not the same you, who does not want to change all the pieces, just buy my update and use it! I want you to understand that!
You don't understand why we're laughing about you charging.
Your taking FREE parts, from FREE models and moving them around, and then CHARGING people to release the full thing that took you all of 10 minutes to do.
As I said, this was my first job, so I assure you I took well over 10 minutes! I do not care if they're laughing at me, but I'm sure a lot of people who do not know how to change parts will be happy to have this update!
Guilherme Cabral | PowerDream Owner | #131 | 250 AM rF | 3rd Keytone Supercross novice class
Image
chaseb31
Posts: 728
Joined: Wed Apr 23, 2014 12:33 am
Team: BPC | let's get it
Location: Portland, Oregon

Re: 2017 Husqvarna Update

Post by chaseb31 »

Dont be a scumbag
Image
Chase Blakely | Oregon Based
chaseb31
Posts: 728
Joined: Wed Apr 23, 2014 12:33 am
Team: BPC | let's get it
Location: Portland, Oregon

Re: 2017 Husqvarna Update

Post by chaseb31 »

The fact you took my homies money is even worst, because I have had the same bike sense before outdoors started, and I know exactly where u got everything lmfao I could of gave it to him if I didn't have work... youre a tru euro am scummy.
Image
Chase Blakely | Oregon Based
Tbonemx428
Posts: 222
Joined: Mon Oct 07, 2013 12:10 am

Re: 2017 Husqvarna Update

Post by Tbonemx428 »

chaseb31 wrote:The fact you took my homies money is even worst, because I have had the same bike sense before outdoors started, and I know exactly where u got everything lmfao I could of gave it to him if I didn't have work... youre a tru euro am scummy.
:shock: :D
GuilhermeMX28
Crushed Dissenter
Posts: 128
Joined: Mon Dec 26, 2016 3:47 pm
Team: PowerDream
Location: Brazil

Re: 2017 Husqvarna Update

Post by GuilhermeMX28 »

Thanks for the great comments, but the update is here for anyone! :lol:
Guilherme Cabral | PowerDream Owner | #131 | 250 AM rF | 3rd Keytone Supercross novice class
Image
mack| spokes
Posts: 930
Joined: Tue Jun 02, 2015 10:15 am
Team: Onlyfansracing
Location: Australia

Re: 2017 Husqvarna Update

Post by mack| spokes »

Two people model two different models and release them for free and you take there work move and scale it a couple times and then you try to sell it to people, why do people have to be like this :x
jlv wrote: Either way, for a suicidal rampage it was pretty good.
MXSEMF
NoFear345
Posts: 1590
Joined: Mon Mar 07, 2011 5:13 am
Team: IG: @dryan345
Location: California

Re: 2017 Husqvarna Update

Post by NoFear345 »

i'd suggest whoever bought the blend to refund it if it was paypal, selling other peoples work LOL :lol:
Image
Aaron Hall
Posts: 1229
Joined: Fri Sep 12, 2014 7:30 pm
Team: Architech
Location: 0161
Contact:

Re: 2017 Husqvarna Update

Post by Aaron Hall »

So these are the parts of nates yam: FMF Tailpipe, x-trigs, cycra hand guards and the GET stuff. Then you've got Jeston's Front pipe from his update to jays ktm. Attackers FatBar pad, also Jay's pro circuit from his kawi and you probably didn't even model the cycra bits for the front plate either.

And you probably didn't pay for the unreleased stuff or even ask the creators if you are able to sell their work.

Also if this is your first bit of work never ask for money especially when all you have done is copy and paste.
maggett wrote:when JLV gives u a good dickslappin
ROSE822 wrote:braden carter die u inbred veggie cunt
Dumbbelly29
Crushed Dissenter
Posts: 339
Joined: Tue Apr 02, 2013 10:24 pm
Team: Privateer

Re: 2017 Husqvarna Update

Post by Dumbbelly29 »

Jesus fuck cut the guy a little slack - he isn't the only guy in this community profiting from other people's work. And he has a point, he isn't charging for the parts specifically he is charging for the work put in.

Think of it like this, you're now a carpenter.. TA DA!

A customer wants a job done, for this job you are able to get all the materials required for FREE though the job itself will take you a day of work to complete. Because you got the materials you have used for free, does this mean you must do the work for free also? Fuck no.

For those of you saying this is just a few minutes work... you're straight retarded, and I would bet you've never even attempted anything like this yourselves. Collecting all the parts required, removing the old parts, aligning the new parts, mapping the UVs of the new parts, and finally creating the template - not to mention all the tedious work in between.

With all this said, I do disagree with the sale of most work for mx simulator. The community progressed at a much faster rate "back in the day" when source files were shared more openly, and not just a select few or those willing to pay had access. I have paid for models, because the quality of most paid models are so much higher than those free, in my eyes - because most free models are no longer being progressed and updated. Instead the focus is on the 'private' models which bring money to the creators.

Though I can understand the attraction to making money from models, skins etc... if you aren't willing to put in work to help the game progress then you aren't really deserving my money

- 9/10 years lurking on these forums do funny things to a man
Image
Kenny154
Crushed Dissenter
Posts: 284
Joined: Thu Jan 05, 2017 10:25 am
Team: PORNHUB.COM

Re: 2017 Husqvarna Update

Post by Kenny154 »

Dumbbelly29 wrote:Jesus fuck cut the guy a little slack - he isn't the only guy in this community profiting from other people's work. And he has a point, he isn't charging for the parts specifically he is charging for the work put in.

Think of it like this, you're now a carpenter.. TA DA!

A customer wants a job done, for this job you are able to get all the materials required for FREE though the job itself will take you a day of work to complete. Because you got the materials you have used for free, does this mean you must do the work for free also? Fuck no.

For those of you saying this is just a few minutes work... you're straight retarded, and I would bet you've never even attempted anything like this yourselves. Collecting all the parts required, removing the old parts, aligning the new parts, mapping the UVs of the new parts, and finally creating the template - not to mention all the tedious work in between.

With all this said, I do disagree with the sale of most work for mx simulator. The community progressed at a much faster rate "back in the day" when source files were shared more openly, and not just a select few or those willing to pay had access. I have paid for models, because the quality of most paid models are so much higher than those free, in my eyes - because most free models are no longer being progressed and updated. Instead the focus is on the 'private' models which bring money to the creators.

Though I can understand the attraction to making money from models, skins etc... if you aren't willing to put in work to help the game progress then you aren't really deserving my money

- 9/10 years lurking on these forums do funny things to a man
GuilhermeMX28
Crushed Dissenter
Posts: 128
Joined: Mon Dec 26, 2016 3:47 pm
Team: PowerDream
Location: Brazil

Re: 2017 Husqvarna Update

Post by GuilhermeMX28 »

As I said I'm not charging parts, but rather the job of putting them in that model, my thinking was not "I'm going to do this to make money" I just did to use it on my team, so one of my friends said " Hey, you should post this, it was good and I still have not seen these pieces in this husqvarna around "so that's what I did, everyone who's talking badly, they're great modellers, and I'll tell them, someday I'll be as good as you , But until then you will have this husq as my first job !!!
Image
Guilherme Cabral | PowerDream Owner | #131 | 250 AM rF | 3rd Keytone Supercross novice class
Image
MOTOZ293
Posts: 3054
Joined: Wed Mar 06, 2013 7:17 pm
Team: Hog Heaven Racing
Location: Ohio

Re: 2017 Husqvarna Update

Post by MOTOZ293 »

I dont think youre getting the point. You youre selling ohter peoples work.. OTHER PEOPLES WORK, all you did was move the parts on to another bike. You also took models that are private (that you probably didnt pay for) Your best bet to end this is refund the people who bought it from you and release it free. Otherwise it sounds like a ban worthy thing. Everyone thats done this has been banned
Image
Post Reply