2019 High Point 3D scanned

Post your tracks here
Forum rules
If your topic doesn't contain a track link, this is the wrong place to post it.
User avatar
137
Posts: 2558
Joined: Wed Jun 24, 2009 1:31 am
Team: LCQ Studios / rF
Contact:

Re: 2019 High Point 3D scanned

Postby 137 » Tue Jun 11, 2019 1:07 am

motocross_will wrote:Image
Thanks TFrye!


Golden lmfao
If you enjoy what I make, donate to the cause 8) It's very much appreciated!!
Image

User avatar
T_Frye127
Posts: 918
Joined: Wed Feb 29, 2012 2:15 am
Team: Volcom
Location: NW Indiana
Contact:

Re: 2019 High Point 3D scanned

Postby T_Frye127 » Tue Jun 11, 2019 1:16 am

i didnt know you had to 3d scan a track to adjust scaling... you right :lol:

Bubba40
Posts: 540
Joined: Thu Apr 18, 2013 3:30 am
Team: Kyb/Enzo

Re: 2019 High Point 3D scanned

Postby Bubba40 » Tue Jun 11, 2019 1:17 am

I can't wait for my next scan is going to be WW Ranch, I'm going to try a before and after moto scans. I'm going to try 50ft for friday night since i gotta have 3 batteries to do it. It's going to cost a lot for batteries but at the end i think it's going to be worth it for MXS And MX Bikes. Hopefully have Ruben and Kyle back on board for the next one!
Image

Bubba40
Posts: 540
Joined: Thu Apr 18, 2013 3:30 am
Team: Kyb/Enzo

Re: 2019 High Point 3D scanned

Postby Bubba40 » Tue Jun 11, 2019 1:18 am

This scan was at 250ft.
Image

User avatar
137
Posts: 2558
Joined: Wed Jun 24, 2009 1:31 am
Team: LCQ Studios / rF
Contact:

Re: 2019 High Point 3D scanned

Postby 137 » Tue Jun 11, 2019 12:40 pm

I’ll definitely be down to help dude!
If you enjoy what I make, donate to the cause 8) It's very much appreciated!!
Image

apicchione127
Posts: 22
Joined: Mon Apr 10, 2017 8:51 pm
Team: SPINC

Re: 2019 High Point 3D scanned

Postby apicchione127 » Tue Jun 11, 2019 6:53 pm

track still won't work for me even after the update :(

ktm161
Posts: 137
Joined: Wed May 15, 2013 3:03 am
Team: @Hall161

Re: 2019 High Point 3D scanned

Postby ktm161 » Tue Jun 11, 2019 6:57 pm

apicchione127 wrote:track still won't work for me even after the update :(

same here :(

Sandhapper
Posts: 1255
Joined: Sat Jul 10, 2010 9:21 am
Team: MotoRAD
Location: The Nederlands

Re: 2019 High Point 3D scanned

Postby Sandhapper » Tue Jun 11, 2019 9:26 pm

Bubba40 wrote:I can't wait for my next scan is going to be WW Ranch, I'm going to try a before and after moto scans. I'm going to try 50ft for friday night since i gotta have 3 batteries to do it. It's going to cost a lot for batteries but at the end i think it's going to be worth it for MXS And MX Bikes. Hopefully have Ruben and Kyle back on board for the next one!


Heck yes I'll help!
2013 EMF outdoors 2nd place overall
2013 MxSCentral outdoors 2nd place overall
2012 EMF outdoors 2nd overall
2012 SMA sx 2nd overall
2011 SMA outdoors champion

Image

xbrandzman
Posts: 9
Joined: Mon Nov 18, 2013 4:11 am
Team: Privateer

Re: 2019 High Point 3D scanned

Postby xbrandzman » Thu Jun 13, 2019 6:51 pm

ktm161 wrote:
apicchione127 wrote:track still won't work for me even after the update :(

same here :(


same

Bubba40
Posts: 540
Joined: Thu Apr 18, 2013 3:30 am
Team: Kyb/Enzo

Re: 2019 High Point 3D scanned

Postby Bubba40 » Thu Jun 13, 2019 7:41 pm

xbrandzman wrote:
ktm161 wrote:
apicchione127 wrote:track still won't work for me even after the update :(

same here :(


same

Can you post your graphics settings ?
Image

jped321
Posts: 14
Joined: Fri Jan 16, 2015 5:41 pm
Team: Privateer

Re: 2019 High Point 3D scanned

Postby jped321 » Sat Jun 15, 2019 3:13 am

yo this shet is sick but like go in there and make some sick ruts? it would make this track legend status.

User avatar
yzmxer608
Posts: 15363
Joined: Mon Dec 29, 2008 4:30 am
Team: SYS
Location: Wisconsin, U.S.A

Re: 2019 High Point 3D scanned

Postby yzmxer608 » Sat Jun 15, 2019 3:39 pm

I'm not getting the overlay decal either. There's only 2 decals listed in the decal file but I don't see anything wrong with how it's setup (the single offtrack decal shows in editor fine).
TeamHavocRacing wrote:If I had a nickel for every time someone asked for this, I would have a whole shitload of nickels.

User avatar
UncleLiberty76
Posts: 66
Joined: Wed Nov 14, 2018 7:29 pm
Team: Grunt-Style

Re: 2019 High Point 3D scanned

Postby UncleLiberty76 » Sat Jun 15, 2019 4:25 pm

This is awesome man. Maybe someone can make a tutorial of this so maybe the community can get together and get the tracks scanned so we can get more accurate height maps for these replicas. Good work man. This track feels so good to rip on.
Image

User avatar
317
Posts: 382
Joined: Tue Nov 03, 2015 4:14 am
Team: DeCal Works
Location: Ohio
Contact:

Re: 2019 High Point 3D scanned

Postby 317 » Sat Jun 15, 2019 9:58 pm

Any update on why the overlay isn't working? Mine is not working either.
Image

User avatar
Unicorn
Crushed Dissenter
Posts: 16
Joined: Fri Jun 14, 2019 1:20 am
Team: Unicorn For Life

Re: 2019 High Point 3D scanned

Postby Unicorn » Sun Jun 16, 2019 3:41 am

track is so fun


Return to “Tracks”

Who is online

Users browsing this forum: No registered users and 10 guests