Real Graphics
-
- Posts: 2449
- Joined: Mon Nov 01, 2010 11:47 am
- Team: SplitFire
- Location: Germany/Bavaria
- Contact:
Re: Real Graphics
*fancy signature*
d4u5d6u7 wrote:good staff, nice skins, like
-
- Crushed Dissenter
- Posts: 352
- Joined: Mon Feb 10, 2014 7:43 pm
Re: Real Graphics
Has anyone here got much knowledge on printers? Currently running only a Mimaki CJV150-130 for the printing side of things as its only me doing one job at a time i don't need much more.
I'm looking to invest in a printer which can print straight chrome or flouresent, currently i just inlay it which isn't ideal as you always have that slight lump due to stacking materials and its a long process. I'm familiar with the Gerber Edge FX but for doing full kits it just doesn't make sense for me due to the cost of ink, material and time it takes to produce them. Any ideas what process some of the bigger companies are using?
Examples
https://www.instagram.com/p/Boh8hSPhtjz/
https://www.instagram.com/p/BvneVtbBGh3/
https://www.instagram.com/p/BxOQ9omhuqT/
https://www.instagram.com/p/BxTGwwCApB_/
Cheers
I'm looking to invest in a printer which can print straight chrome or flouresent, currently i just inlay it which isn't ideal as you always have that slight lump due to stacking materials and its a long process. I'm familiar with the Gerber Edge FX but for doing full kits it just doesn't make sense for me due to the cost of ink, material and time it takes to produce them. Any ideas what process some of the bigger companies are using?
Examples
https://www.instagram.com/p/Boh8hSPhtjz/
https://www.instagram.com/p/BvneVtbBGh3/
https://www.instagram.com/p/BxOQ9omhuqT/
https://www.instagram.com/p/BxTGwwCApB_/
Cheers
-
- Posts: 1252
- Joined: Sat Dec 20, 2008 4:28 am
- Team: MotoSavage
- Location: Kansas
- Contact:
Re: Real Graphics
We have battled with this for a while but had settled without the Gerber and dont really care much to get one. For example this last year we have bought 4 new epson printers but they do not offer any way to print flo or chrome colors. There are Summa printers that you can get to print chrome but they operate off ribbons and you can only have X amount of ribbons loaded at once. From all the research I have done, the Gerber is about the only way right now to do the chrome/flo like you'd like it to turn out, but the costs to run the machine are outrageous.Haberfield24 wrote:Has anyone here got much knowledge on printers? Currently running only a Mimaki CJV150-130 for the printing side of things as its only me doing one job at a time i don't need much more.
I'm looking to invest in a printer which can print straight chrome or flouresent, currently i just inlay it which isn't ideal as you always have that slight lump due to stacking materials and its a long process. I'm familiar with the Gerber Edge FX but for doing full kits it just doesn't make sense for me due to the cost of ink, material and time it takes to produce them. Any ideas what process some of the bigger companies are using?
Examples
https://www.instagram.com/p/Boh8hSPhtjz/
https://www.instagram.com/p/BvneVtbBGh3/
https://www.instagram.com/p/BxOQ9omhuqT/
https://www.instagram.com/p/BxTGwwCApB_/
Cheers
-
- Crushed Dissenter
- Posts: 352
- Joined: Mon Feb 10, 2014 7:43 pm
Re: Real Graphics
Thanks for the indepth reply mate! I've searched high and low and just can't get my head around how companies are producing the graphics like they are. I'm by no means a total noob, but when it comes to that aspect i am But now you mention the ribbon system is makes more sense when companies only have all black logos on a chrome fender for example. It's the cleanest look but i've never really noticed coloured logos when people have chrome or flou unless its inlayed. Really sucks as i don't want to go down the Gerber route, especially as there's a local guy killing the evo/90s stuff with one already so i think i'd be wasting my time. Might consider one just for swingarm and fork stickers tho!broland278 wrote:We have battled with this for a while but had settled without the Gerber and dont really care much to get one. For example this last year we have bought 4 new epson printers but they do not offer any way to print flo or chrome colors. There are Summa printers that you can get to print chrome but they operate off ribbons and you can only have X amount of ribbons loaded at once. From all the research I have done, the Gerber is about the only way right now to do the chrome/flo like you'd like it to turn out, but the costs to run the machine are outrageous.
-
- Posts: 1252
- Joined: Sat Dec 20, 2008 4:28 am
- Team: MotoSavage
- Location: Kansas
- Contact:
Re: Real Graphics
Currently in the process of selling my RMZ and going to transfer to a KTM.. working on the new kit. Open to opinions.
-
- Posts: 2920
- Joined: Thu Aug 06, 2015 12:11 am
- Team: Heckman Productions
- Location: Michigan, USA
- Contact:
Re: Real Graphics
Not an a fan of the way you have the numbers on there but the kit is super cleanbroland278 wrote:Currently in the process of selling my RMZ and going to transfer to a KTM.. working on the new kit. Open to opinions.
-
- Posts: 3777
- Joined: Mon Jan 23, 2012 3:17 am
- Team: Prime Design GFX
- Location: Australia
- Contact:
-
- Posts: 1252
- Joined: Sat Dec 20, 2008 4:28 am
- Team: MotoSavage
- Location: Kansas
- Contact:
Re: Real Graphics
Latest two kits for myself and newly added KLX110(which I have more fun on than the big bike)
Re: Real Graphics
110 looks good brotha, I actually made the KP's 110. While I'm flattered you used my design, as a designer be creative and make something your own. Good work though!broland278 wrote:Latest two kits for myself and newly added KLX110(which I have more fun on than the big bike)
Re: Real Graphics
double post, just realized you copied his big bike too. GG
-
- Posts: 1960
- Joined: Fri Jun 21, 2013 5:38 pm
- Team: Elevated Motorsports
Re: Real Graphics
Damn, can't even make a kit for yourself anymore without people getting upsetti spaghetti
TeamHavocRacing wrote:it's all the liberals fault
-
- Posts: 1252
- Joined: Sat Dec 20, 2008 4:28 am
- Team: MotoSavage
- Location: Kansas
- Contact:
Re: Real Graphics
Not sure how I would of copied his bike bike kit that he just posted last week and I have had mine made since march lol You can check my IG if need beCG351 wrote:double post, just realized you copied his big bike too. GG
-
- Posts: 1041
- Joined: Sun Feb 08, 2015 6:41 pm
- Team: GSR/137 Kid
- Location: Bottom Feeder at LCQ Studios
- Contact:
Re: Real Graphics
what if he copied you broland?broland278 wrote:Not sure how I would of copied his bike bike kit that he just posted last week and I have had mine made since march lol You can check my IG if need be
Bottom feeder at LCQ Studios
Internet Nice Guy!
Internet Nice Guy!
-
- Posts: 1252
- Joined: Sat Dec 20, 2008 4:28 am
- Team: MotoSavage
- Location: Kansas
- Contact:
Re: Real Graphics
I guess its a possibility, I wouldn't careMr. Wiggles wrote:what if he copied you broland?broland278 wrote:Not sure how I would of copied his bike bike kit that he just posted last week and I have had mine made since march lol You can check my IG if need be