REPOST: TEAMS using RIPPED Models - The French Con

Organize races and post results here
Post Reply
TM_Infidel
Posts: 763
Joined: Tue Jul 03, 2012 3:13 pm
Team: TM Factory-Racing
Location: Downunder
Contact:

REPOST: TEAMS using RIPPED Models - The French Con

Post by TM_Infidel »

REPOST from Models & Skin Editing:
RIPPED Models from MXGP3 / MESX used in MXSIM

It's time some clowns were exposed. I'm calling out the rippers of Milestones MXGP / MESX models who use them in MXSimulator including a few competitors who know these models are ripped from another game but acquire them to use in official mxs series events which goes against jlv's #3 golden rule as listed:
3. Do not post or request anything illegal. This includes copyright violations such as 'ripping' other users content or content from other games. If you violate these rules, you will be banned. The duration depends on how bad it is, but most are permanent. The forum admin reserves the right to enforce or not enforce these rules unfairly and hypocritically.
You can draw your own conclusions and comment accordingly. I've highlighted the TM bikes below for both MXGP & Sim which sounds biased but i think i know them pretty much back the front in both games to help bring things to light. I hope these clowns are dealt with by jlv, as well as EMF, rF and other reputable competition series hosts.

I've made some great friends from France in sim over the years where sadly most of these clowns who rip reside. Don't get me wrong France is a great place including its people which i have experienced first hand but like all it has its own parasite infestations. Perhaps ripping models is a spin off from the "desperation or lack of new content being shared" in sim in recent times or the pay for everything attitude regarding models between the new breed & have and have not's with a touch of general "high nosed" superior snobbery thrown in same as irl. Even so ripping stuff from other games is against sim rules and those responsible need to accept accountability like those before them imo.

I like many others appreciate what jlv as a one man band has created and am sure there are reasons why he hasn't employed 1-2 extra part/full time staff to create annual models and parts for all to receive via update packs for a fee so we all have equal choices which seems a more worthy way plus give back to jlv, cover ongoing costs and "make sim great again" while helping to reduce the effects of a community imploding when signs are there but i just can't pinpoint them yet.

The following dudes are obviously friends, some have skill sets but lack any sense of respect.

I'm calling out:
FrcD / Flavien Clementine
FB: https://www.facebook.com/FrcD07
https://www.facebook.com/flavien.clementine (follows all the usual suspects)
Fr aka "Le turd" is pro-active in ripping models from either or both MXGP3 / MESX then edits them with various adjustments or parts to use in sim & sell for profit at everyone's expense. You can check his sim posts and go find the same bikes via google or the steam community hubs for mxgp / mesx if you have an eye for detail. Creations look questionably legit in the forums either due to being renders or using sim wheels used on milestone bikes. Most peeps just can't tell the difference if ripped or not so it seems.
FrcD forum posts: http://forum.mxsimulator.com/search.php ... 5&sr=posts

LC Créations_ / Louis Cocquet
FB: https://www.facebook.com/LC-Cr%C3%A9ati ... 882361474/
Loui aka "Le croissant" uses ripped models in sim / sells for profit also at everyone's expense:
LC forum posts: http://forum.mxsimulator.com/viewtopic. ... 98#p828898
- a few interesting lids and stuff used not yet avail in sim but are in milestone games if you look close enough.
http://forum.mxsimulator.com/search.php ... 9&sr=posts
https://www.facebook.com/cross.man.5070 (congrats on his marriage to his BF)
New forum name now possibly W2K (ripped lid & same trademark pics as LC Créations_?)

Enter .."POWERSPORT" a current French mxsim team using ripped models in EMF Pro 450/250/125 online series competition.
Anthony Rouillard FB: https://www.facebook.com/ARDesignMxs
https://www.facebook.com/anthony.parigo
A great source of ripped models on here courtesy of their buds. Hard to tell what is ripped or what isnt? ..cool to see them frame "FrcD" and knowingly accept ripped models for their 2018 mxsim outdoor setup. Why we can't download their swag via the EMF EU skins thread i wonder ..or view in competition vids or demos ..oh wait here's one: https://www.youtube.com/watch?v=TU6LYpf-UQo&t=
Image
Image
Image
MXSim TM by FrcD
Image

Image
C'est la vie baby
RFX_corentin_12
Posts: 1200
Joined: Tue Oct 11, 2011 1:26 pm
Team: Impact
Location: France

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by RFX_corentin_12 »

nothing new here lol, french community is terrible, that's why i almost dont talk to any french guys on this game (and i'm french)
Image
michael30
Posts: 169
Joined: Sat Jun 08, 2013 2:16 pm

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by michael30 »

Just a bit lame that they even dare to call it there models.
Image
Jim Kinson
Crushed Dissenter
Posts: 100
Joined: Sat Dec 16, 2017 9:46 am
Team: Privateer

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by Jim Kinson »

Is the rmz his? He has shown the UV but i'am still 50/50 with it... It kind of looks like the hum3d model...
M@xTizZz
Posts: 2753
Joined: Wed Jan 25, 2012 4:20 pm
Team: TizZy-Design
Location: France

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by M@xTizZz »

this post is interesting !


RFX_corentin_12 wrote:nothing new here lol, french community is terrible, that's why i almost dont talk to any french guys on this game (and i'm french)
Because you are THE example of a french nice guy for sure :roll:
Maxime Tison
I AM NOT MXSEMF Official admin ANYMORE | PLEASE DO NOT CONTACT ME ABOUT MXSEMF
TM_Infidel
Posts: 763
Joined: Tue Jul 03, 2012 3:13 pm
Team: TM Factory-Racing
Location: Downunder
Contact:

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by TM_Infidel »

Jim Kinson wrote:Is the rmz his? He has shown the UV but i'am still 50/50 with it... It kind of looks like the hum3d model...
..Ripping models you can still do a temp / uv for sim and show it off like its your own no?

PAY2021 who is popular for putting together mods focused on MXGP & MESX games plus a few of his followers purchased the rmz together from hum3d and modified it for MESX as part of his mods releases if you scroll down his FB page you can read about it. Nothing wrong with that but i'd say it was probably ripped from MESX at PAY2021's expense and modified it in certain areas since some peeps are well practiced at doing so. The TM and RMZ are definitely not the only bikes ripped if you look close enough.

PAY2021
https://www.facebook.com/PAY2021MXMODS/

Unfortunately back in February PAY2021 posted on his FB explaining how to work with resources from various games made with Unreal Engine much to the delight of a few wankers.
RFX_corentin_12
Posts: 1200
Joined: Tue Oct 11, 2011 1:26 pm
Team: Impact
Location: France

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by RFX_corentin_12 »

M@xTizZz wrote:this post is interesting !


RFX_corentin_12 wrote:nothing new here lol, french community is terrible, that's why i almost dont talk to any french guys on this game (and i'm french)
Because you are THE example of a french nice guy for sure :roll:
i dont had any issues with any other people who are not french, only had issues with french because most of them are dumb, and i didnt do stuff like that (rip model from other game or anything)
Image
Jim Kinson
Crushed Dissenter
Posts: 100
Joined: Sat Dec 16, 2017 9:46 am
Team: Privateer

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by Jim Kinson »

TM_Infidel wrote:
Jim Kinson wrote:Is the rmz his? He has shown the UV but i'am still 50/50 with it... It kind of looks like the hum3d model...
..Ripping models you can still do a temp / uv for sim and show it off like its your own no?

PAY2021 who is popular for putting together mods focused on MXGP & MESX games plus a few of his followers purchased the rmz together from hum3d and modified it for MESX as part of his mods releases if you scroll down his FB page you can read about it. Nothing wrong with that but i'd say it was probably ripped from MESX at PAY2021's expense and modified it in certain areas since some peeps are well practiced at doing so. The TM and RMZ are definitely not the only bikes ripped if you look close enough.

PAY2021
https://www.facebook.com/PAY2021MXMODS/

Unfortunately back in February PAY2021 posted on his FB explaining how to work with resources from various games made with Unreal Engine much to the delight of a few wankers.
Yeah he showed the uv and it kinda looked abit high poly so it looks like he retepoligised it
Jeremy150
Posts: 3321
Joined: Mon Jul 30, 2012 9:56 am
Team: MV Films

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by Jeremy150 »

Jim Kinson wrote:retepoligised it
yikes
Image
Jim Kinson
Crushed Dissenter
Posts: 100
Joined: Sat Dec 16, 2017 9:46 am
Team: Privateer

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by Jim Kinson »

Jeremy150 wrote:
Jim Kinson wrote:retopologize it
yikes
I see no problem :shock:
mxs4crf
Posts: 1564
Joined: Wed Dec 01, 2010 8:21 pm
Team: FCrew
Location: France,Paris

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by mxs4crf »

RFX_corentin_12 wrote:nothing new here lol, french community is terrible, that's why i almost dont talk to any french guys on this game (and i'm french)
Didn't you ripped my Valli back in the day? :D
Image
Jeremy150
Posts: 3321
Joined: Mon Jul 30, 2012 9:56 am
Team: MV Films

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by Jeremy150 »

Jim Kinson wrote:
Jeremy150 wrote:
Jim Kinson wrote:retopologize it
yikes
I see no problem :shock:
The only problem I see is how defending you are of these guys ruining the community. :shock:
Image
Jim Kinson
Crushed Dissenter
Posts: 100
Joined: Sat Dec 16, 2017 9:46 am
Team: Privateer

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by Jim Kinson »

Jeremy150 wrote:
Jim Kinson wrote:
Jeremy150 wrote: yikes
I see no problem :shock:
The only problem I see is how defending you are of these guys ruining the community. :shock:
Noooo! i wasn't trying to seem like i was defending them! what they did is wrong, Was just stating things they could have done.
Boblob801
Posts: 3998
Joined: Mon Nov 16, 2009 4:59 am
Team: <3 Andy
Location: New Zealand
Contact:

Re: REPOST: TEAMS using RIPPED Models - The French Con

Post by Boblob801 »

We need a Robin hood of ripping, things would be boring without the french community. They wouldn't pay for it even if they couldn't rip it. I must also not that I have never ripped anything before tehe :wink:
Hi
Post Reply