2013 One Industries Vapor PSD by Grizz

Post about creating and skinning models here
User avatar
Stheart Clothing
Crushed Dissenter
Posts: 243
Joined: Sat May 19, 2012 2:55 am
Team: Stheart.com

2013 One Industries Vapor PSD by Grizz

Postby Stheart Clothing » Fri Oct 26, 2012 4:47 pm

Grizz wrote:Here is the .psd for you guys! Includes new Jett boots!

Image

Huge Thanks to the following,
One Industries for giving me the opportunity to make this as accurate as possible. Can't thank them enough!
Checkerz for getting me hooked up with One Industries.
DJ for being my fifth favorite Australian (and the wrinkles were cool too ).
Piista for the rider model.
Naupoiss for making 80% of the Jett boots.

Mediafire Link: http://www.mediafire.com/?jk4l6cxs7ojjas4
www.stheart.com
Image
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas

Ryan_Tate172
Crushed Dissenter
Posts: 447
Joined: Sat Oct 13, 2012 2:49 am
Team: Apex Photo/FWR

Re: 2013 One Industries Vapor PSD by Grizz

Postby Ryan_Tate172 » Fri Oct 26, 2012 4:49 pm

awesome. only thing is i was hoping to use the tech 10's but its good nonetheless. :D thanks Grizz.

User avatar
Stheart Clothing
Crushed Dissenter
Posts: 243
Joined: Sat May 19, 2012 2:55 am
Team: Stheart.com

Re: 2013 One Industries Vapor PSD by Grizz

Postby Stheart Clothing » Fri Oct 26, 2012 4:53 pm

That's what the .psd is for. So that you can add whatever boots you want :wink: . Sadly you can't add a leatt brace.
www.stheart.com
Image
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas

User avatar
mbork-1
Posts: 1700
Joined: Thu Feb 11, 2010 1:20 pm
Team: NOTEAM
Location: Latvia

Re: 2013 One Industries Vapor PSD by Grizz

Postby mbork-1 » Fri Oct 26, 2012 4:55 pm

JETT'ssssssssssssssss!!!!!!!!!!!!!!!!!!!!!!!!!!!

awesome gear too!!!
Image
3rd MX2 EMF - AX Series 2011
2nd MX1 BMF - Friday Night Series 2012
1st MX3 - EMXs
8th MX1 EMF - MX Series 2012

Ryan_Tate172
Crushed Dissenter
Posts: 447
Joined: Sat Oct 13, 2012 2:49 am
Team: Apex Photo/FWR

Re: 2013 One Industries Vapor PSD by Grizz

Postby Ryan_Tate172 » Fri Oct 26, 2012 6:00 pm

Stheart Clothing wrote:That's what the .psd is for. So that you can add whatever boots you want :wink: . Sadly you can't add a leatt brace.


I just added the tech 10's from the TwoTwo gear lol. Thanks ;)

User avatar
Stheart Clothing
Crushed Dissenter
Posts: 243
Joined: Sat May 19, 2012 2:55 am
Team: Stheart.com

Re: 2013 One Industries Vapor PSD by Grizz

Postby Stheart Clothing » Fri Oct 26, 2012 7:12 pm

Ryan_Tate172 wrote:
Stheart Clothing wrote:That's what the .psd is for. So that you can add whatever boots you want :wink: . Sadly you can't add a leatt brace.


I just added the tech 10's from the TwoTwo gear lol. Thanks ;)

Make sure you add normal maps too!

Use these Tech 10's http://www.mediafire.com/?0bg9ty91fcxsqv3
www.stheart.com
Image
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas

ryanmx25
Posts: 1171
Joined: Mon Mar 07, 2011 12:16 am
Location: ohio

Re: 2013 One Industries Vapor PSD by Grizz

Postby ryanmx25 » Fri Oct 26, 2012 7:13 pm

This is the uses the p2sta3 model correct?
Image

User avatar
Stheart Clothing
Crushed Dissenter
Posts: 243
Joined: Sat May 19, 2012 2:55 am
Team: Stheart.com

Re: 2013 One Industries Vapor PSD by Grizz

Postby Stheart Clothing » Fri Oct 26, 2012 7:21 pm

Yes. The models are included in the download.
www.stheart.com
Image
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas

User avatar
Will-Hughes#205
Posts: 419
Joined: Tue Aug 09, 2011 2:46 pm
Team: Atlas | TLD
Location: Wales, UK
Contact:

Re: 2013 One Industries Vapor PSD by Grizz

Postby Will-Hughes#205 » Fri Oct 26, 2012 10:18 pm

You could add the leatt.. all you need do is add the leatt to the skin. Then save it with the name of the new Leatt model. I hope i explained that clearly enough lol

User avatar
Stheart Clothing
Crushed Dissenter
Posts: 243
Joined: Sat May 19, 2012 2:55 am
Team: Stheart.com

Re: 2013 One Industries Vapor PSD by Grizz

Postby Stheart Clothing » Fri Oct 26, 2012 10:38 pm

Will-Hughes#205 wrote:You could add the leatt.. all you need do is add the leatt to the skin. Then save it with the name of the new Leatt model. I hope i explained that clearly enough lol

No sir. The Leatt model uses the P2sta3 pants but everything else is from the p2sta2. So the jersey and multiple other things will not line up.
www.stheart.com
Image
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas

User avatar
mbork-1
Posts: 1700
Joined: Thu Feb 11, 2010 1:20 pm
Team: NOTEAM
Location: Latvia

Re: 2013 One Industries Vapor PSD by Grizz

Postby mbork-1 » Sat Oct 27, 2012 7:50 am

Stheart Clothing wrote:
Will-Hughes#205 wrote:You could add the leatt.. all you need do is add the leatt to the skin. Then save it with the name of the new Leatt model. I hope i explained that clearly enough lol

No sir. The Leatt model uses the P2sta3 pants but everything else is from the p2sta2. So the jersey and multiple other things will not line up.

didint they relese leatt with P2 and P3??? all you need is to use P2Leatt model
Image
3rd MX2 EMF - AX Series 2011
2nd MX1 BMF - Friday Night Series 2012
1st MX3 - EMXs
8th MX1 EMF - MX Series 2012

User avatar
Stheart Clothing
Crushed Dissenter
Posts: 243
Joined: Sat May 19, 2012 2:55 am
Team: Stheart.com

Re: 2013 One Industries Vapor PSD by Grizz

Postby Stheart Clothing » Sun Oct 28, 2012 5:09 am

mbork-1 wrote:didint they relese leatt with P2 and P3??? all you need is to use P2Leatt model

The Leatt model uses the P2sta3 pants but everything else is from the p2sta2. So the jersey and multiple other things will not line up.

This gear uses P2sta3. The special model was for the defcon gear originally.
www.stheart.com
Image
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas

lucasappel97
Posts: 9
Joined: Wed Apr 06, 2011 6:37 am
Team: Privateer

Re: 2013 One Industries Vapor PSD by Grizz

Postby lucasappel97 » Thu Nov 29, 2012 6:42 pm

is it somehow i can get the fonts to change the numbers and name or is it like an "privet" thing?


Btw thx for the psd and some awesome gear! :)
sry for my bad english....

User avatar
Stheart Clothing
Crushed Dissenter
Posts: 243
Joined: Sat May 19, 2012 2:55 am
Team: Stheart.com

Re: 2013 One Industries Vapor PSD by Grizz

Postby Stheart Clothing » Thu Nov 29, 2012 8:19 pm

lucasappel97 wrote:is it somehow i can get the fonts to change the numbers and name or is it like an "privet" thing?


Btw thx for the psd and some awesome gear! :)
sry for my bad english....


I think you need this.

http://www.dafont.com/disparador-stencil.font
www.stheart.com
Image
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas

andi15
Posts: 16
Joined: Mon Feb 01, 2010 6:14 pm

Re: 2013 One Industries Vapor PSD by Grizz

Postby andi15 » Fri Nov 30, 2012 8:07 pm

Howe i can put my number on teh Gear ?
ther is still a number and a name on the PNG in the download
so howe i can put my number on it
pleas explain im new on this


Return to “Model and Skin Editing”

Who is online

Users browsing this forum: TheAtomicBird and 13 guests