608+9391=YZ Premixers

Post about creating and skinning models here
User avatar
Kording
Posts: 1334
Joined: Sun Nov 08, 2009 12:53 pm
Team: Privateer
Location: Germany

Re: 608+9391=YZ Premixers

Postby Kording » Tue Dec 04, 2012 5:12 pm

p2sta wrote:try some of DJs trakcs (millvile, washougal, budscreek) it gets shiny only on tracks with proper enviro maps

Oh yes i see. Now it looks badass. One thing i noticed in blender was the pipe slightly going through the kickstart. But thats just a small mistake and not realy noticeable.
Tennis, Basketball and Baseball all requires one ball
Motocross requires two!

User avatar
Kording
Posts: 1334
Joined: Sun Nov 08, 2009 12:53 pm
Team: Privateer
Location: Germany

Re: 608+9391=YZ Premixers

Postby Kording » Tue Dec 04, 2012 5:26 pm

Dp i just check it ingame and it was fine. Maybe my eyes become bad. nevermind then :D
Tennis, Basketball and Baseball all requires one ball
Motocross requires two!

p2sta
Posts: 3262
Joined: Fri Jul 30, 2010 7:08 am
Location: Czech Republic
Contact:

Re: 608+9391=YZ Premixers

Postby p2sta » Tue Dec 04, 2012 6:49 pm

DJs yzf is not lined properly in blender, it works fine ingame tho

juicer731
Posts: 633
Joined: Sat Apr 21, 2012 2:57 am
Location: Florida, Merica

Re: 608+9391=YZ Premixers

Postby juicer731 » Tue Dec 04, 2012 7:22 pm

yzmxer608 wrote:
juicer731 wrote:I can't get it to work. The bike keeps coming up as the stock 250. Here's what I did: I took all the jms and put them in the personal folder and took the template and renamed it to what you put. That's probably way off; I've always had trouble with naming and stuff.

You only took the JM's you wanted to use right? So you can see the bike in the skin list, but on the track it shows as stock?


Yep, only the jms I wanted. The bike comes up in list and i choose it but it still loads up as a stock yz250.

User avatar
yzmxer608
Posts: 15267
Joined: Mon Dec 29, 2008 4:30 am
Team: Race Tech/SD
Location: Wisconsin, U.S.A

Re: 608+9391=YZ Premixers

Postby yzmxer608 » Tue Dec 04, 2012 9:03 pm

Hmmm, mind posting what you named the skins? I know you said you renamed then how I had in the first post, but something is wrong somewhere.
TeamHavocRacing wrote:If I had a nickel for every time someone asked for this, I would have a whole shitload of nickels.

jasper125
Posts: 1050
Joined: Mon Mar 15, 2010 4:20 pm

Re: 608+9391=YZ Premixers

Postby jasper125 » Tue Dec 04, 2012 9:11 pm

ok i got it ingame but only ilabb graphics showing up nothing else under what template do you put the ilabb skin??

juicer731
Posts: 633
Joined: Sat Apr 21, 2012 2:57 am
Location: Florida, Merica

Re: 608+9391=YZ Premixers

Postby juicer731 » Tue Dec 04, 2012 10:16 pm

yz250-Hybrid Mod-SickBike.png (I think i might have messed up here. i put sickbike because i assumed it was whatever i felt like putting there but that may not be the case.

User avatar
yzmxer608
Posts: 15267
Joined: Mon Dec 29, 2008 4:30 am
Team: Race Tech/SD
Location: Wisconsin, U.S.A

Re: 608+9391=YZ Premixers

Postby yzmxer608 » Tue Dec 04, 2012 10:44 pm

jasper125 wrote:ok i got it ingame but only ilabb graphics showing up nothing else under what template do you put the ilabb skin??

You can put the Ilabb graphics under DJ's original template or mine, those parts are still in the same places.
juicer731 wrote:yz250-Hybrid Mod-SickBike.png (I think i might have messed up here. i put sickbike because i assumed it was whatever i felt like putting there but that may not be the case.

No what you have there would be correct. I'll have to look at a few things to try to figure out what's wrong, right now I don't have a clue :?.
TeamHavocRacing wrote:If I had a nickel for every time someone asked for this, I would have a whole shitload of nickels.

jasper125
Posts: 1050
Joined: Mon Mar 15, 2010 4:20 pm

Re: 608+9391=YZ Premixers

Postby jasper125 » Tue Dec 04, 2012 11:11 pm

Ok that helped alot but i still get can't load @yz250_side_plates-Hybrid.jm and @yz250_front_plate-Hybrid.jm

User avatar
Ohagan75
Posts: 3772
Joined: Mon Jan 23, 2012 3:17 am
Team: Prime Design GFX
Location: Australia
Contact:

Re: 608+9391=YZ Premixers

Postby Ohagan75 » Tue Dec 04, 2012 11:32 pm

are they directly in your personal folder?
Image
Donate if you like My Creations

juicer731
Posts: 633
Joined: Sat Apr 21, 2012 2:57 am
Location: Florida, Merica

Re: 608+9391=YZ Premixers

Postby juicer731 » Wed Dec 05, 2012 12:31 am

yzmxer608 wrote:No what you have there would be correct. I'll have to look at a few things to try to figure out what's wrong, right now I don't have a clue :?.

Alright thanks. I'll see if i can find anything else.

User avatar
yzmxer608
Posts: 15267
Joined: Mon Dec 29, 2008 4:30 am
Team: Race Tech/SD
Location: Wisconsin, U.S.A

Re: 608+9391=YZ Premixers

Postby yzmxer608 » Wed Dec 05, 2012 12:35 am

I didn't include any plate JM's, if you really want them you can use DJ's original ones (not many people use them anymore so that's why I didn't include them).

Since so many people wanted some, here are a few skins.

http://www.mediafire.com/?6j5rtnkiyadsdkf

yz125:
Stock 2010 graphics with the chrome FMF pipe with hand guards and rotor guard
Ilabb appetite graphics with FMF factory pipe with hand guards and a rotor guard (and my personal version of this)

yz250:
Stock 2010 bike
Stock 2010 graphics with the chrome FMF pipe with hand guards and a rotor guard
Ilabb appetite graphics with FMF factory pipe with hand guards and a rotor guard (and my personal version of this)

Might not be the options everyone wants, but there's too many to make separate skins of. I really meant this to be for skinners only and not a full public release of a drag and go complete update. I also noticed the oversized rotors of these wheels: viewtopic.php?f=7&t=18827 stick through the rotor guard.
TeamHavocRacing wrote:If I had a nickel for every time someone asked for this, I would have a whole shitload of nickels.

guibubba2
Posts: 421
Joined: Mon Jul 18, 2011 8:39 pm
Location: Sao Carlos

Re: 608+9391=YZ Premixers

Postby guibubba2 » Wed Dec 05, 2012 1:51 am

Now I'll marry you
Image

NAUpoiss75
Posts: 1226
Joined: Tue Jul 27, 2010 9:28 am
Team: Spazztic
Location: Estonia

Re: 608+9391=YZ Premixers

Postby NAUpoiss75 » Wed Dec 05, 2012 2:00 pm

Thanks a lot yzed!

User avatar
Nick#126
Posts: 1054
Joined: Wed Feb 08, 2012 7:14 pm
Team: Privateer
Location: Veldhoven, The Netherlands
Contact:

Re: 608+9391=YZ Premixers

Postby Nick#126 » Wed Dec 05, 2012 3:09 pm

Thanks so much ! Love it !
Nick van Gerwen

Image


Return to “Model and Skin Editing”

Who is online

Users browsing this forum: No registered users and 5 guests