Oh yes i see. Now it looks badass. One thing i noticed in blender was the pipe slightly going through the kickstart. But thats just a small mistake and not realy noticeable.p2sta wrote:try some of DJs trakcs (millvile, washougal, budscreek) it gets shiny only on tracks with proper enviro maps
608+9391=YZ Premixers
Re: 608+9391=YZ Premixers
Tennis, Basketball and Baseball all requires one ball
Motocross requires two!
Motocross requires two!
Re: 608+9391=YZ Premixers
Dp i just check it ingame and it was fine. Maybe my eyes become bad. nevermind then
Tennis, Basketball and Baseball all requires one ball
Motocross requires two!
Motocross requires two!
Re: 608+9391=YZ Premixers
DJs yzf is not lined properly in blender, it works fine ingame tho
Re: 608+9391=YZ Premixers
Yep, only the jms I wanted. The bike comes up in list and i choose it but it still loads up as a stock yz250.yzmxer608 wrote:You only took the JM's you wanted to use right? So you can see the bike in the skin list, but on the track it shows as stock?juicer731 wrote:I can't get it to work. The bike keeps coming up as the stock 250. Here's what I did: I took all the jms and put them in the personal folder and took the template and renamed it to what you put. That's probably way off; I've always had trouble with naming and stuff.
Re: 608+9391=YZ Premixers
Hmmm, mind posting what you named the skins? I know you said you renamed then how I had in the first post, but something is wrong somewhere.
TeamHavocRacing wrote:If I had a nickel for every time someone asked for this, I would have a whole shitload of nickels.
Re: 608+9391=YZ Premixers
ok i got it ingame but only ilabb graphics showing up nothing else under what template do you put the ilabb skin??
Re: 608+9391=YZ Premixers
yz250-Hybrid Mod-SickBike.png (I think i might have messed up here. i put sickbike because i assumed it was whatever i felt like putting there but that may not be the case.
Re: 608+9391=YZ Premixers
You can put the Ilabb graphics under DJ's original template or mine, those parts are still in the same places.jasper125 wrote:ok i got it ingame but only ilabb graphics showing up nothing else under what template do you put the ilabb skin??
No what you have there would be correct. I'll have to look at a few things to try to figure out what's wrong, right now I don't have a clue .juicer731 wrote:yz250-Hybrid Mod-SickBike.png (I think i might have messed up here. i put sickbike because i assumed it was whatever i felt like putting there but that may not be the case.
TeamHavocRacing wrote:If I had a nickel for every time someone asked for this, I would have a whole shitload of nickels.
Re: 608+9391=YZ Premixers
Ok that helped alot but i still get can't load @yz250_side_plates-Hybrid.jm and @yz250_front_plate-Hybrid.jm
-
- Posts: 3777
- Joined: Mon Jan 23, 2012 3:17 am
- Team: Prime Design GFX
- Location: Australia
- Contact:
Re: 608+9391=YZ Premixers
Alright thanks. I'll see if i can find anything else.yzmxer608 wrote:No what you have there would be correct. I'll have to look at a few things to try to figure out what's wrong, right now I don't have a clue .
Re: 608+9391=YZ Premixers
I didn't include any plate JM's, if you really want them you can use DJ's original ones (not many people use them anymore so that's why I didn't include them).
Since so many people wanted some, here are a few skins.
http://www.mediafire.com/?6j5rtnkiyadsdkf
yz125:
Stock 2010 graphics with the chrome FMF pipe with hand guards and rotor guard
Ilabb appetite graphics with FMF factory pipe with hand guards and a rotor guard (and my personal version of this)
yz250:
Stock 2010 bike
Stock 2010 graphics with the chrome FMF pipe with hand guards and a rotor guard
Ilabb appetite graphics with FMF factory pipe with hand guards and a rotor guard (and my personal version of this)
Might not be the options everyone wants, but there's too many to make separate skins of. I really meant this to be for skinners only and not a full public release of a drag and go complete update. I also noticed the oversized rotors of these wheels: http://forum.mxsimulator.com/viewtopic.php?f=7&t=18827 stick through the rotor guard.
Since so many people wanted some, here are a few skins.
http://www.mediafire.com/?6j5rtnkiyadsdkf
yz125:
Stock 2010 graphics with the chrome FMF pipe with hand guards and rotor guard
Ilabb appetite graphics with FMF factory pipe with hand guards and a rotor guard (and my personal version of this)
yz250:
Stock 2010 bike
Stock 2010 graphics with the chrome FMF pipe with hand guards and a rotor guard
Ilabb appetite graphics with FMF factory pipe with hand guards and a rotor guard (and my personal version of this)
Might not be the options everyone wants, but there's too many to make separate skins of. I really meant this to be for skinners only and not a full public release of a drag and go complete update. I also noticed the oversized rotors of these wheels: http://forum.mxsimulator.com/viewtopic.php?f=7&t=18827 stick through the rotor guard.
TeamHavocRacing wrote:If I had a nickel for every time someone asked for this, I would have a whole shitload of nickels.
Re: 608+9391=YZ Premixers
Now I'll marry you
-
- Posts: 1226
- Joined: Tue Jul 27, 2010 9:28 am
- Team: Spazztic
- Location: Estonia
Re: 608+9391=YZ Premixers
Thanks a lot yzed!