i made a bike skin but it won't show up in game. i have everything named as follows:
fc450v2016_fork_upper-2019 450 SXF.jm
fc450v2016_fork_lower-2019 450 SXF.jm
fc450v2016_frame-2019 450 SXF.jm
fc450v2016_swingarm-2019 450 SXF.jm
fc450v2016_2019 450 SXF_norm.png
fc450v2016_2019 450 SXF_spec.png
fc450v2016_2019 450 SXF-Crase #329.png
am i naming something wrong here or what??
bike not showing up in game
Re: bike not showing up in game
Your .pngs should be fc450v2016-2019 450 SXF_norm.png so instead of an underscore at the beginning it should be -bcrase14 wrote:i made a bike skin but it won't show up in game. i have everything named as follows:
fc450v2016_fork_upper-2019 450 SXF.jm
fc450v2016_fork_lower-2019 450 SXF.jm
fc450v2016_frame-2019 450 SXF.jm
fc450v2016_swingarm-2019 450 SXF.jm
fc450v2016_2019 450 SXF_norm.png
fc450v2016_2019 450 SXF_spec.png
fc450v2016_2019 450 SXF-Crase #329.png
am i naming something wrong here or what??
Re: bike not showing up in game
I fixed the dashes so now it’ll show up in the bike setup, but when I go to ride it, it reverts back to the stock husky.
Re: bike not showing up in game
When I load into a game, it’ll say can’t load the frame, side plate, front plate, or the upper fork.
Re: bike not showing up in game
You can't have spaces in your jm names
bcrase14 wrote: fc450v2016_fork_upper-2019450SXF.jm
fc450v2016_fork_lower-2019450SXF.jm
fc450v2016_frame-2019450SXF.jm
fc450v2016_swingarm-2019450SXF.jm
Re: bike not showing up in game
it didn't work. i've pretty much tried everything and nothing is seeming to work.
Re: bike not showing up in game
Could you share your current file names and the location where you're placing them?
This is a block of text that can be added to posts you make. There is a 255 character limit.
Re: bike not showing up in game
fc450v2016_fork_upper-LoneWolfKTM.jm
fc450v2016_fork_lower-LoneWolfKTM.jm
fc450v2016_frame-LoneWolfKTM.jm
fc450v2016_swingarm-LoneWolfKTM.jm
fc450v2016-Lone Wolf KTM-Crase #329.png
fc450v2016-Lone Wolf KTM_norm.png
fc450v2016-Lone Wolf KTM_spec.png
i changed the skin name to the team name. i have them in a personal folder saved on my desktop, then i'll make a saf and put it into the MX Simulator Personal Folder, just like i do with my gear. And when i go into the game, i can click on it in the bike settings, but when i go to ride, it's just the stock husky. in the game chat it says it can't load any of the jms, including some front and side plates, but i didn't think we would need those. i had a buddy who was able to put graphics on the bike and put it into the game for the 2019 season, but he doesn't get on anymore so i don't know how he got it to work.
fc450v2016_fork_lower-LoneWolfKTM.jm
fc450v2016_frame-LoneWolfKTM.jm
fc450v2016_swingarm-LoneWolfKTM.jm
fc450v2016-Lone Wolf KTM-Crase #329.png
fc450v2016-Lone Wolf KTM_norm.png
fc450v2016-Lone Wolf KTM_spec.png
i changed the skin name to the team name. i have them in a personal folder saved on my desktop, then i'll make a saf and put it into the MX Simulator Personal Folder, just like i do with my gear. And when i go into the game, i can click on it in the bike settings, but when i go to ride, it's just the stock husky. in the game chat it says it can't load any of the jms, including some front and side plates, but i didn't think we would need those. i had a buddy who was able to put graphics on the bike and put it into the game for the 2019 season, but he doesn't get on anymore so i don't know how he got it to work.
Re: bike not showing up in game
you have spaces in your png name...
It needs to match the jm, so it knows what jm to read
It needs to match the jm, so it knows what jm to read
Re: bike not showing up in game
I tried that as well and it didn’t work.nickuzick wrote:you have spaces in your png name...
It needs to match the jm, so it knows what jm to read
Re: bike not showing up in game
First, make sure you have file extensions enabled. This is usually turned off by default, and it may be causing you to name your files incorrectly.
Name your files like this, and drop them into your personal folder without packing them into a saf. You can saf them later once everything reads in game. The most important factor is that the red text matches.
fc450v2016_fork_upper-LoneWolfKTM.jm
fc450v2016_fork_lower-LoneWolfKTM.jm
fc450v2016_frame-LoneWolfKTM.jm
fc450v2016_swingarm-LoneWolfKTM.jm
fc450v2016-LoneWolfKTM-Crase #329.png
fc450v2016-LoneWolfKTM_norm.png
fc450v2016-LoneWolfKTM_spec.png
FWIW, I have been putting spaces in my file names for 10 years with no issue, but a few people lately have suggested that it causes problems. I would suggest adding the spaces back in for readability after you get everything working.
If you still get error messages about the JMs, try downloading them from your original source again. Your problem may be simply be unreadable files.
Name your files like this, and drop them into your personal folder without packing them into a saf. You can saf them later once everything reads in game. The most important factor is that the red text matches.
fc450v2016_fork_upper-LoneWolfKTM.jm
fc450v2016_fork_lower-LoneWolfKTM.jm
fc450v2016_frame-LoneWolfKTM.jm
fc450v2016_swingarm-LoneWolfKTM.jm
fc450v2016-LoneWolfKTM-Crase #329.png
fc450v2016-LoneWolfKTM_norm.png
fc450v2016-LoneWolfKTM_spec.png
FWIW, I have been putting spaces in my file names for 10 years with no issue, but a few people lately have suggested that it causes problems. I would suggest adding the spaces back in for readability after you get everything working.
If you still get error messages about the JMs, try downloading them from your original source again. Your problem may be simply be unreadable files.
This is a block of text that can be added to posts you make. There is a 255 character limit.
Re: bike not showing up in game
KTM57 wrote:First, make sure you have file extensions enabled. This is usually turned off by default, and it may be causing you to name your files incorrectly.
Name your files like this, and drop them into your personal folder without packing them into a saf. You can saf them later once everything reads in game. The most important factor is that the red text matches.
fc450v2016_fork_upper-LoneWolfKTM.jm
fc450v2016_fork_lower-LoneWolfKTM.jm
fc450v2016_frame-LoneWolfKTM.jm
fc450v2016_swingarm-LoneWolfKTM.jm
fc450v2016-LoneWolfKTM-Crase #329.png
fc450v2016-LoneWolfKTM_norm.png
fc450v2016-LoneWolfKTM_spec.png
FWIW, I have been putting spaces in my file names for 10 years with no issue, but a few people lately have suggested that it causes problems. I would suggest adding the spaces back in for readability after you get everything working.
If you still get error messages about the JMs, try downloading them from your original source again. Your problem may be simply be unreadable files.
Thanks KTM, i had to re-download the files. it's finally working now.