Grizz wrote:Here is the .psd for you guys! Includes new Jett boots!
Huge Thanks to the following,
One Industries for giving me the opportunity to make this as accurate as possible. Can't thank them enough!
Checkerz for getting me hooked up with One Industries.
DJ for being my fifth favorite Australian (and the wrinkles were cool too ).
Piista for the rider model.
Naupoiss for making 80% of the Jett boots.
Mediafire Link: http://www.mediafire.com/?jk4l6cxs7ojjas4
2013 One Industries Vapor PSD by Grizz
-
- Crushed Dissenter
- Posts: 243
- Joined: Sat May 19, 2012 2:55 am
- Team: Stheart.com
2013 One Industries Vapor PSD by Grizz
www.stheart.com
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
-
- Crushed Dissenter
- Posts: 447
- Joined: Sat Oct 13, 2012 2:49 am
- Team: Apex Photo/FWR
Re: 2013 One Industries Vapor PSD by Grizz
awesome. only thing is i was hoping to use the tech 10's but its good nonetheless. thanks Grizz.
-
- Crushed Dissenter
- Posts: 243
- Joined: Sat May 19, 2012 2:55 am
- Team: Stheart.com
Re: 2013 One Industries Vapor PSD by Grizz
That's what the .psd is for. So that you can add whatever boots you want . Sadly you can't add a leatt brace.
www.stheart.com
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
Re: 2013 One Industries Vapor PSD by Grizz
JETT'ssssssssssssssss!!!!!!!!!!!!!!!!!!!!!!!!!!!
awesome gear too!!!
awesome gear too!!!
3rd MX2 EMF - AX Series 2011
2nd MX1 BMF - Friday Night Series 2012
1st MX3 - EMXs
8th MX1 EMF - MX Series 2012
-
- Crushed Dissenter
- Posts: 447
- Joined: Sat Oct 13, 2012 2:49 am
- Team: Apex Photo/FWR
Re: 2013 One Industries Vapor PSD by Grizz
I just added the tech 10's from the TwoTwo gear lol. ThanksStheart Clothing wrote:That's what the .psd is for. So that you can add whatever boots you want . Sadly you can't add a leatt brace.
-
- Crushed Dissenter
- Posts: 243
- Joined: Sat May 19, 2012 2:55 am
- Team: Stheart.com
Re: 2013 One Industries Vapor PSD by Grizz
Make sure you add normal maps too!Ryan_Tate172 wrote:I just added the tech 10's from the TwoTwo gear lol. ThanksStheart Clothing wrote:That's what the .psd is for. So that you can add whatever boots you want . Sadly you can't add a leatt brace.
Use these Tech 10's http://www.mediafire.com/?0bg9ty91fcxsqv3
www.stheart.com
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
-
- Crushed Dissenter
- Posts: 243
- Joined: Sat May 19, 2012 2:55 am
- Team: Stheart.com
Re: 2013 One Industries Vapor PSD by Grizz
Yes. The models are included in the download.
www.stheart.com
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
-
- Posts: 419
- Joined: Tue Aug 09, 2011 2:46 pm
- Team: Atlas | TLD
- Location: Wales, UK
Re: 2013 One Industries Vapor PSD by Grizz
You could add the leatt.. all you need do is add the leatt to the skin. Then save it with the name of the new Leatt model. I hope i explained that clearly enough lol
-
- Crushed Dissenter
- Posts: 243
- Joined: Sat May 19, 2012 2:55 am
- Team: Stheart.com
Re: 2013 One Industries Vapor PSD by Grizz
No sir. The Leatt model uses the P2sta3 pants but everything else is from the p2sta2. So the jersey and multiple other things will not line up.Will-Hughes#205 wrote:You could add the leatt.. all you need do is add the leatt to the skin. Then save it with the name of the new Leatt model. I hope i explained that clearly enough lol
www.stheart.com
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
Re: 2013 One Industries Vapor PSD by Grizz
didint they relese leatt with P2 and P3??? all you need is to use P2Leatt modelStheart Clothing wrote:No sir. The Leatt model uses the P2sta3 pants but everything else is from the p2sta2. So the jersey and multiple other things will not line up.Will-Hughes#205 wrote:You could add the leatt.. all you need do is add the leatt to the skin. Then save it with the name of the new Leatt model. I hope i explained that clearly enough lol
3rd MX2 EMF - AX Series 2011
2nd MX1 BMF - Friday Night Series 2012
1st MX3 - EMXs
8th MX1 EMF - MX Series 2012
-
- Crushed Dissenter
- Posts: 243
- Joined: Sat May 19, 2012 2:55 am
- Team: Stheart.com
Re: 2013 One Industries Vapor PSD by Grizz
mbork-1 wrote:didint they relese leatt with P2 and P3??? all you need is to use P2Leatt model
This gear uses P2sta3. The special model was for the defcon gear originally.The Leatt model uses the P2sta3 pants but everything else is from the p2sta2. So the jersey and multiple other things will not line up.
www.stheart.com
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
-
- Posts: 9
- Joined: Wed Apr 06, 2011 6:37 am
- Team: Privateer
Re: 2013 One Industries Vapor PSD by Grizz
is it somehow i can get the fonts to change the numbers and name or is it like an "privet" thing?
Btw thx for the psd and some awesome gear!
sry for my bad english....
Btw thx for the psd and some awesome gear!
sry for my bad english....
-
- Crushed Dissenter
- Posts: 243
- Joined: Sat May 19, 2012 2:55 am
- Team: Stheart.com
Re: 2013 One Industries Vapor PSD by Grizz
I think you need this.lucasappel97 wrote:is it somehow i can get the fonts to change the numbers and name or is it like an "privet" thing?
Btw thx for the psd and some awesome gear!
sry for my bad english....
http://www.dafont.com/disparador-stencil.font
www.stheart.com
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
"I'd Eiffel Tower the shit out of Dianna Dahlgren with another dude. A little accidental male contact wouldn't bother me in that situation." -ih8hondas
Re: 2013 One Industries Vapor PSD by Grizz
Howe i can put my number on teh Gear ?
ther is still a number and a name on the PNG in the download
so howe i can put my number on it
pleas explain im new on this
ther is still a number and a name on the PNG in the download
so howe i can put my number on it
pleas explain im new on this