mxserver-2009-05-08
Re: mxserver-2009-05-08
cd changes the current working directory. Microsoft's documentation is here
Your gateway IP will only work for computers outside your lan. If you're playing on the server, you can use "localhost" or "127.0.0.1" to connect. If you're on another computer on the same lan, you'll have to use your lan address to connect.
Your gateway IP will only work for computers outside your lan. If you're playing on the server, you can use "localhost" or "127.0.0.1" to connect. If you're on another computer on the same lan, you'll have to use your lan address to connect.
Josh Vanderhoof
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Re: mxserver-2009-05-08
That worked, thanks!!! I'll post the server details when I get the final details finished. Thanks again jlv!!!
Edit: Ok I found another problem . When I go start a normal race in single player and type "savetrackinfo" it says I'm not connected to the server, even though the server is running. Am I doing this wrong?
Edit: Ok I found another problem . When I go start a normal race in single player and type "savetrackinfo" it says I'm not connected to the server, even though the server is running. Am I doing this wrong?
TeamHavocRacing wrote:If I had a nickel for every time someone asked for this, I would have a whole shitload of nickels.
Re: mxserver-2009-05-08
It's "/savetrackinfo".
Josh Vanderhoof
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Re: mxserver-2009-05-08
Oh, it works now. I can't believe I screwed even that up haha. Thanks again!
Edit: I have the server up and running, and I can get in using 127.0.0.1 but no one else can get in using my Default Gateway ip (192.168.1.254) with and without the :19800. I'm not sure why this is happening, nothing can be wrong with the args file since the server is actually running and I can get in. Both the mx.exe and mxserver.exe are allowed past my firewall. Is it just because I'm using DSL (650 kb/s) internet on a normal computer?
Edit2: I figured it out, in my portforward settings I looked at the details for all of the ports I have forwarded and all of them have a public ip of 99.137.222.211, I tried that as an ip and it connected . That ip is not stated in ipconfig at all! Weird stuff, but at least it works now.
Edit: I have the server up and running, and I can get in using 127.0.0.1 but no one else can get in using my Default Gateway ip (192.168.1.254) with and without the :19800. I'm not sure why this is happening, nothing can be wrong with the args file since the server is actually running and I can get in. Both the mx.exe and mxserver.exe are allowed past my firewall. Is it just because I'm using DSL (650 kb/s) internet on a normal computer?
Edit2: I figured it out, in my portforward settings I looked at the details for all of the ports I have forwarded and all of them have a public ip of 99.137.222.211, I tried that as an ip and it connected . That ip is not stated in ipconfig at all! Weird stuff, but at least it works now.
TeamHavocRacing wrote:If I had a nickel for every time someone asked for this, I would have a whole shitload of nickels.
Re: mxserver-2009-05-08
question, if i havent got internet connection , i can still playing on my LAN server?
Re: mxserver-2009-05-08
No, the server has to be able to contact the key server.
Josh Vanderhoof
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Re: mxserver-2009-05-08
Any chance for an online server page? Editing the thread everytime you open or close a server is just annoying.
Also, when can we get our hands on that results uploading script?
Cheers
Also, when can we get our hands on that results uploading script?
Cheers
Re: mxserver-2009-05-08
You can upload them to my page (http://mxsimulator.com/serverstatus.html) using this for --results-cmd:
curl -s -F name=elsinore.mxsimulator.com -F password=xxxxxx -F results=<results.txt http://mxsimulator.com/uploadresults.php
Use your IP instead of elsinore.mxsimulator.com and make up a password for yourself. The first time you upload it will set the password, after that you have to keep using the same one. You'll need to get curl too.
I'll have some nicer scripts soon.
curl -s -F name=elsinore.mxsimulator.com -F password=xxxxxx -F results=<results.txt http://mxsimulator.com/uploadresults.php
Use your IP instead of elsinore.mxsimulator.com and make up a password for yourself. The first time you upload it will set the password, after that you have to keep using the same one. You'll need to get curl too.
I'll have some nicer scripts soon.
Josh Vanderhoof
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Re: mxserver-2009-05-08
Rightio, I have the line
in my args file, and have curl.exe in the same folder as everything else. The server doesn't stay open. Can you see my fault?
EDIT: OK, I put everything from 'curl' onwards from that above line, into a bat file, and it seemed to work. But your page displays this:
"undefined, TypeError: raceinfo.laps is undefined "
and my server console has this
curl -s -F password=formetoknow -F results= http://mxsimulator.com/uploadresults.php 0<results.txt
then your php script. How very odd.
Looked at some info at the curl website, and I'm pretty sure everything is written correctly
EDIT 2: using " fixed it. ie
Cheers
Code: Select all
--results-cmd curl -s -F name=60.240.2.139 -F password=formetoknow -F results=<results.txt http://mxsimulator.com/uploadresults.php
EDIT: OK, I put everything from 'curl' onwards from that above line, into a bat file, and it seemed to work. But your page displays this:
"undefined, TypeError: raceinfo.laps is undefined "
and my server console has this
curl -s -F password=formetoknow -F results= http://mxsimulator.com/uploadresults.php 0<results.txt
then your php script. How very odd.
Looked at some info at the curl website, and I'm pretty sure everything is written correctly
EDIT 2: using " fixed it. ie
Code: Select all
curl -s -F "name=60.240.2.139" -F "password=formetoknow" -F "results=<results.txt" http://mxsimulator.com/uploadresults.php
-
- Posts: 104
- Joined: Sat Dec 15, 2007 12:34 am
- Team: Privateer
- Location: FRANCE
- Contact:
Re: mxserver-2009-05-08
hi DJ ,
Can you tell me what you wrote in a bat file pleas ?I put everything from 'curl' onwards from that above line, into a bat file, and it seemed to work.
MXF Online Championship here =>http://www.mxforum.be/index.php?showforum=80
Re: mxserver-2009-05-08
OK, here is what you do.
1. Download Curl from here. Place curl.exe in the same folder as mxserver.exe
2. Add --results-cmd resultsupload.bat to your server args list. Bat file can be called anything you like
3. Make a bat file with the following line
Save the bat file into the same folder as mxserver.exe
Thats about it
1. Download Curl from here. Place curl.exe in the same folder as mxserver.exe
2. Add --results-cmd resultsupload.bat to your server args list. Bat file can be called anything you like
3. Make a bat file with the following line
Code: Select all
curl -s -F "name=your.ip.address:and_port" -F "password=xxxxx" -F "results=<results.txt" http://mxsimulator.com/uploadresults.php
Thats about it
-
- Posts: 104
- Joined: Sat Dec 15, 2007 12:34 am
- Team: Privateer
- Location: FRANCE
- Contact:
Re: mxserver-2009-05-08
MXF Online Championship here =>http://www.mxforum.be/index.php?showforum=80
Re: mxserver-2009-05-08
Are you running 64 bit windows?
Also, could you please get that error converted to english?
Also, could you please get that error converted to english?
-
- Posts: 104
- Joined: Sat Dec 15, 2007 12:34 am
- Team: Privateer
- Location: FRANCE
- Contact:
Re: mxserver-2009-05-08
My windows running 32 bit.
My error is : "the procedure entry point HMAC_cleanup is not found in the dynamic link library libeay32.dll" (with transletor google)
EDIT : My error is fixed ! (my libeay32.dll was disabled) I download [http://curl.haxx.se/download/openssl-0. ... 32-bin.zip] and the "libeay32.dll" and "libssl32.dll" are available !
Thx DJ
My error is : "the procedure entry point HMAC_cleanup is not found in the dynamic link library libeay32.dll" (with transletor google)
EDIT : My error is fixed ! (my libeay32.dll was disabled) I download [http://curl.haxx.se/download/openssl-0. ... 32-bin.zip] and the "libeay32.dll" and "libssl32.dll" are available !
Thx DJ
MXF Online Championship here =>http://www.mxforum.be/index.php?showforum=80
Re: mxserver-2009-05-08
Does that results page hook in with knarf's site?
TeamHavocRacing wrote:If I had a nickel for every time someone asked for this, I would have a whole shitload of nickels.