[Release] Snodgrass MX
Forum rules
If your topic doesn't contain a track link, this is the wrong place to post it.
If your topic doesn't contain a track link, this is the wrong place to post it.
-
- Posts: 21
- Joined: Sat Nov 21, 2015 2:57 am
- Team: Mantis United
- Location: Jurien Bay, Western Australia
[Release] Snodgrass MX
Hey MXS community,
just releasing my first completed track, hope you enjoy it.
Snodgrass MX has a practice track vibe going on but it is still big enough to race with 40 people.
i used very few statues and reduced the size of the billboards to make this track as easy as possible on computers,
and with a crappy Intel in-built (family HD) graphics card this track will run at 90-65 FPS so all you budget MXS
players can rip it up.
The track comes with the mx2015.low object pack to make it easy for you guys
credits to:
- kellen brauer for the grass decal, fmf mat, van, bikestand and the open barn from KBHouse.
- MXSGP for the decal from MXGP RD3.
- dj fot his tyres.
- dj for the trees.
- RF for the .ppm, roost files and tileinfo from Mx2015 objectpack
they are greatly appreciated
now go rip it
Download (52mb): https://www.dropbox.com/s/2pofb0nc1wmro ... MX.7z?dl=0
and if you dont have 7-zip, here is the link : https://www.dropbox.com/s/21mmbnglt8je2 ... p.zip?dl=0
just releasing my first completed track, hope you enjoy it.
Snodgrass MX has a practice track vibe going on but it is still big enough to race with 40 people.
i used very few statues and reduced the size of the billboards to make this track as easy as possible on computers,
and with a crappy Intel in-built (family HD) graphics card this track will run at 90-65 FPS so all you budget MXS
players can rip it up.
The track comes with the mx2015.low object pack to make it easy for you guys
credits to:
- kellen brauer for the grass decal, fmf mat, van, bikestand and the open barn from KBHouse.
- MXSGP for the decal from MXGP RD3.
- dj fot his tyres.
- dj for the trees.
- RF for the .ppm, roost files and tileinfo from Mx2015 objectpack
they are greatly appreciated
now go rip it
Download (52mb): https://www.dropbox.com/s/2pofb0nc1wmro ... MX.7z?dl=0
and if you dont have 7-zip, here is the link : https://www.dropbox.com/s/21mmbnglt8je2 ... p.zip?dl=0
Mantis United
Direct Contracting
IMS Products
LHM
Direct Contracting
IMS Products
LHM
-
- Posts: 21
- Joined: Sat Nov 21, 2015 2:57 am
- Team: Mantis United
- Location: Jurien Bay, Western Australia
Re: [Release] Snodgrass MX
Also, Any feed back would be greatly appreciated
Mantis United
Direct Contracting
IMS Products
LHM
Direct Contracting
IMS Products
LHM
-
- Posts: 581
- Joined: Fri Dec 18, 2015 10:34 pm
- Team: 251 Graphix I guess
- Location: Goose Creek, South Carolina
- Contact:
Re: [Release] Snodgrass MX
Liked the track. Not one of the best but definitely not one of the worst. Like the environment and elevation. Though did notice that it was a bit challenging at times on a 125, still a decent track. I'd say work on ruts and breaking bumps. Other than that, decent track
| Unofficially Official MotoSavage Rookie of the Year 2017 |
Pumaxcs wrote:Women ain't shit, man.
They'll lick a public toilet seat but ignore my texts.
-
- Posts: 21
- Joined: Sat Nov 21, 2015 2:57 am
- Team: Mantis United
- Location: Jurien Bay, Western Australia
Re: [Release] Snodgrass MX
how would you like the ruts to be? if you had a track to point me towards that would be sweet cheers for playing the track brofunkychicken wrote:Liked the track. Not one of the best but definitely not one of the worst. Like the environment and elevation. Though did notice that it was a bit challenging at times on a 125, still a decent track. I'd say work on ruts and breaking bumps. Other than that, decent track
Mantis United
Direct Contracting
IMS Products
LHM
Direct Contracting
IMS Products
LHM
-
- Posts: 3603
- Joined: Mon Sep 10, 2012 12:15 am
- Team: PoGo
- Location: Indiana
Re: [Release] Snodgrass MX
You're best chance to find a style you like would be to ride other tracks made by guys like checkerz, Barrington, Mahan, etc. who have found a style they like and works. Don't try to copy their ruts, just try to alter yours based on theirsMasterblaster1998 wrote:how would you like the ruts to be? if you had a track to point me towards that would be sweet cheers for playing the track brofunkychicken wrote:Liked the track. Not one of the best but definitely not one of the worst. Like the environment and elevation. Though did notice that it was a bit challenging at times on a 125, still a decent track. I'd say work on ruts and breaking bumps. Other than that, decent track
WAR CRY <3
Sun Burn
-
- Posts: 581
- Joined: Fri Dec 18, 2015 10:34 pm
- Team: 251 Graphix I guess
- Location: Goose Creek, South Carolina
- Contact:
Re: [Release] Snodgrass MX
Agree with him personal favorite are Barrington's stuff but that's just memxsrider96 wrote:You're best chance to find a style you like would be to ride other tracks made by guys like checkerz, Barrington, Mahan, etc. who have found a style they like and works. Don't try to copy their ruts, just try to alter yours based on theirsMasterblaster1998 wrote: how would you like the ruts to be? if you had a track to point me towards that would be sweet cheers for playing the track bro
| Unofficially Official MotoSavage Rookie of the Year 2017 |
Pumaxcs wrote:Women ain't shit, man.
They'll lick a public toilet seat but ignore my texts.
-
- Posts: 21
- Joined: Sat Nov 21, 2015 2:57 am
- Team: Mantis United
- Location: Jurien Bay, Western Australia
Re: [Release] Snodgrass MX
cheers for the feedback boys
Mantis United
Direct Contracting
IMS Products
LHM
Direct Contracting
IMS Products
LHM
-
- Posts: 21
- Joined: Sat Nov 21, 2015 2:57 am
- Team: Mantis United
- Location: Jurien Bay, Western Australia
Re: [Release] Snodgrass MX
so you used a saf extractor to extract our decals and you thank us for the decals
what a smart move
what a smart move
Maxime Tison
I AM NOT MXSEMF Official admin ANYMORE | PLEASE DO NOT CONTACT ME ABOUT MXSEMF
I AM NOT MXSEMF Official admin ANYMORE | PLEASE DO NOT CONTACT ME ABOUT MXSEMF
-
- Posts: 1038
- Joined: Sun Feb 08, 2015 6:41 pm
- Team: GSR/137 Kid
- Location: Bottom Feeder at LCQ Studios
- Contact:
Re: [Release] Snodgrass MX
M@xTizZz wrote:so you used a saf extractor to extract our decals and you thank us for the decals
what a smart move
Bottom feeder at LCQ Studios
Internet Nice Guy!
Internet Nice Guy!
-
- Posts: 258
- Joined: Sun Dec 07, 2014 8:39 pm
- Team: None
- Location: UK
Re: [Release] Snodgrass MX
Decal is shit anywayM@xTizZz wrote:so you used a saf extractor to extract our decals and you thank us for the decals
what a smart move
not that I could make any better
-
- Posts: 21
- Joined: Sat Nov 21, 2015 2:57 am
- Team: Mantis United
- Location: Jurien Bay, Western Australia
Re: [Release] Snodgrass MX
Im sorry im new to the community, is that not okay?M@xTizZz wrote:so you used a saf extractor to extract our decals and you thank us for the decals
what a smart move
And if not, i apologise.
Mantis United
Direct Contracting
IMS Products
LHM
Direct Contracting
IMS Products
LHM