MXS Twitter

On The Pipe · Post by **On The Pipe** » Thu Jan 12, 2017 12:12 am

I wish they went back to 2 strokes for supercross.

TeamHavocRacing · Post by **TeamHavocRacing** » Tue Jan 17, 2017 5:22 pm

|
Richard Burns would've turned 46 today if it wasn't for damn brain cancer. RIP RBR
|

Wahlamt · Post by **Wahlamt** » Thu Jan 19, 2017 4:40 am

What happened to Vurbmotogamers? They haven't uploaded anything in ages.

Ddavis · Post by **Ddavis** » Sat Jan 21, 2017 3:10 am

I've been permanently tilted for a while now, if I come across as rude, it's because right now I give zero fucks about what anyone's opinion is.

FlyinHigh · Post by **FlyinHigh** » Sat Jan 21, 2017 3:36 am

To those wondering what happened to vurbmoto

https://vurbmoto.com/blogs/all-good-thi ... 017/29453/

TeamHavocRacing · Post by **TeamHavocRacing** » Mon Jan 23, 2017 4:38 am

|
It's great to hear what Guy Martin's saying about his 2017 TT bid! Could someone tell me what it is he's actually saying?
|

TeamHavocRacing · Post by **TeamHavocRacing** » Sat Feb 04, 2017 8:22 am

|
Digging through some fairly old pix. "Go Team Havoc" by Roger Mears is gold. Ivan's was platinum.
|

model_90 · Post by **model_90** » Mon Feb 06, 2017 3:38 am

Atom6246 · Post by **Atom6246** » Sat Feb 11, 2017 9:50 pm

mxsrider96 · Post by **mxsrider96** » Sat Feb 11, 2017 10:34 pm

That setup is so titties

yzmxer608 · Post by **yzmxer608** » Sun Feb 12, 2017 1:18 am

Looking at some photos of the factory bikes, had a few observations.

Roczen has a super awkward looking brake pedal angle.

These Neken triple clamps have an interesting cutout in them, I'm guessing something to do with flex characteristics.

I had to look at a stock bike but looks like KTM uses a spherical type end almost like a heim joint for the brake pedal connection instead of a normal clevis. Interesting.

Should have paid more attention when putting the tire on if that's what they plan on doing

.

MOAR DATA. Would be cool to be able to see some of this stuff and how they use the data. Saw on Tomac's bike they have a clutch position sensor on the actuator arm.

Wonder what the tape is covering up.

Only thing I can think of for this thing is that it's an ambient temperature sensor.

PC bikes have this odd looking cover for the countershaft sprocket bolt, wonder if it still uses the normal bent washer and that's just something to protect it.

Phathry25 · Post by **Phathry25** » Sun Feb 12, 2017 5:59 pm

Is the bent washer still a thing? Last time I check on the quality bikes I rode it was a spring washer and bolt.

yzmxer608 · Post by **yzmxer608** » Sun Feb 12, 2017 8:04 pm

I guess, this questionable Kawi has it.
http://motocross.transworld.net/wp-cont ... 20x745.jpg

On The Pipe · Post by **On The Pipe** » Mon Feb 13, 2017 12:05 am

I believe it is a snapring holding the countershaft sprocket on my bike it is the same way. RC4's RM250 had a plastic cover similar to that. If I had to guess it would keep dirt from getting on the shaft?

yzmxer608 · Post by **yzmxer608** » Mon Feb 13, 2017 4:51 am

Was not expecting the last camera pan action...

If you are not aware of how big these bears are, watch this video. They could literally kill you in a few seconds.

MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter