>>>>>Custom 250f Engine Sounds<<<<<<

[Jonee589]

After a lot of stuffing around here it is.
It is very hard to get right and if my friend didn't make a program to split the files then it would have driven us to insanity.
Thanks to JLV for his sounds as a base to work off, and my friend for making the splitting program and working with me to try and make some sounds!
Please don't expect them to be amazing and better than JLV's.
Sounds are based off my 2010 CRF250R. I duct taped a SIng-Star Microphone to the back of my helmet and plugged it into my Go Pro Hero 2, then I set off down a straight gravel road to try and get some sound data. (Not the best setup but it's the best I could do)
If you don't rev the bananas out of a 250f in this game, these sounds probably won't be for you. If you find any good pipe sound combo's post them below. Some feedback would be nice.


Instructions: Put the contents of the RAR file into your MX Simulator Personal folder.
http://www.mediafire.com/?89do0iheauuuc7f

[paulr093]

I like the idea. The sounds need to be more crisper tho. They are very muffly, if that is a word

[shawn1331]

After a lot of stuffing around here it is.
It is very hard to get right and if my friend didn't make a program to split the files then it would have driven us to insanity.
Thanks to JLV for his sounds as a base to work off, and my friend for making the splitting program and working with me to try and make some sounds!
Please don't expect them to be amazing and better than JLV's.
Sounds are based off my 2010 CRF250R. I duct taped a SIng-Star Microphone to the back of my helmet and plugged it into my Go Pro Hero 2, then I set off down a straight gravel road to try and get some sound data. (Not the best setup but it's the best I could do)
If you don't rev the bananas out of a 250f in this game, these sounds probably won't be for you. If you find any good pipe sound combo's post them below. Some feedback would be nice.


Instructions: Put the contents of the RAR file into your MX Simulator Personal folder.
http://www.mediafire.com/?89do0iheauuuc7f

Could you make a little youtube video out of it? Or is that too much to ask? Even a demo would be good.

[Ballsfalsky]

Sound's good. However, you could play with the idle sounds, and the limiter sounds a little bit. it also sounds like it's being played through a big tube.

[Jonee589]

I know what you guys mean, but you make the sound sample up and it sounds awesome, you put it in game and it sounds crap so it is hard to get a crisp awesome sound. When I get bored I just change up some more sounds, but this was the first lot that sounded like something that people might want to try.
It also depends on your speakers, they determine what it sounds like.

[Ballsfalsky]

Logitech G35's.
2 Mission 732's + 2 Cirwin Vega at-10's powered by a Sumo Polaris class A/B amp, and a Sumo Electra plus preamp.

I understand what you're getting at. The game probably drops the audio quality a lot. You should send me this program. I'd love to try and make some 2 stroke sounds (for the 250's)!

[richy34]

ill be trying this as soon as i get my pc back the idea of making ur own sounds sounds legit

[Jonee589]

Logitech G35's.
2 Mission 732's + 2 Cirwin Vega at-10's powered by a Sumo Polaris class A/B amp, and a Sumo Electra plus preamp.

I understand what you're getting at. The game probably drops the audio quality a lot. You should send me this program. I'd love to try and make some 2 stroke sounds (for the 250's)!

If you are interested, sure I'll send it to you. You need to get a sound recording and then get 3 samples out of it. A, B and C
A: Full throttle acceleration
B: Half throttle acceleration
C: Closed throttle de-acceleration (haha)

The average length of these would be 1-2 seconds. You also need a text file for A,B and C with a list of all their rpm levels and their sizes (in bytes)
(rpm) 01000
(size) 10574
(rpm) 01108
(size) 9558

Don't let it overwhelm you, it is pretty simple.
Then you open one of the samples and its according text file in the program and let it do it's magic.

Repeat for all 3 samples and put them in a folder.
Thats as simple as I can explain it

You would have to ask JLV for his 250 2stroke sounds unpacked so you can get the rpm level and their sizes.

[shawn1331]

Logitech G35's.
2 Mission 732's + 2 Cirwin Vega at-10's powered by a Sumo Polaris class A/B amp, and a Sumo Electra plus preamp.

I understand what you're getting at. The game probably drops the audio quality a lot. You should send me this program. I'd love to try and make some 2 stroke sounds (for the 250's)!

If you are interested, sure I'll send it to you. You need to get a sound recording and then get 3 samples out of it. A, B and C
A: Full throttle acceleration
B: Half throttle acceleration
C: Closed throttle de-acceleration (haha)

The average length of these would be 1-2 seconds. You also need a text file for A,B and C with a list of all their rpm levels and their sizes (in bytes)
(rpm) 01000
(size) 10574
(rpm) 01108
(size) 9558

Don't let it overwhelm you, it is pretty simple.
Then you open one of the samples and its according text file in the program and let it do it's magic.

Repeat for all 3 samples and put them in a folder.
Thats as simple as I can explain it

You would have to ask JLV for his 250 2stroke sounds unpacked so you can get the rpm level and their sizes.

I would love to get the 125's going if you'd be willing to send it to me? It sounds like something I'd like to try.

[Ballsfalsky]

Logitech G35's.
2 Mission 732's + 2 Cirwin Vega at-10's powered by a Sumo Polaris class A/B amp, and a Sumo Electra plus preamp.

I understand what you're getting at. The game probably drops the audio quality a lot. You should send me this program. I'd love to try and make some 2 stroke sounds (for the 250's)!

If you are interested, sure I'll send it to you. You need to get a sound recording and then get 3 samples out of it. A, B and C
A: Full throttle acceleration
B: Half throttle acceleration
C: Closed throttle de-acceleration (haha)

The average length of these would be 1-2 seconds. You also need a text file for A,B and C with a list of all their rpm levels and their sizes (in bytes)
(rpm) 01000
(size) 10574
(rpm) 01108
(size) 9558

Don't let it overwhelm you, it is pretty simple.
Then you open one of the samples and its according text file in the program and let it do it's magic.

Repeat for all 3 samples and put them in a folder.
Thats as simple as I can explain it

You would have to ask JLV for his 250 2stroke sounds unpacked so you can get the rpm level and their sizes.

Next time I go riding Ill do my best to get something. Thanks!

[Jonee589]

Next time I go riding Ill do my best to get something. Thanks!

Here's the program and my 250f Files
http://www.mediafire.com/?8hlblrt86fongbv

If lots of people attempt it we should have some good outcomes.

[Paulo#33]

Oh my godness , more more more more more more more more 250f sounds duuuudeeeeeeeeeees pleaseeeeeeeeeeeeeeeeeeee

[shawn1331]

Alrighty so I tested out your pipe set up or sounds I should say. They sound good so far, but I think we need to get a full rnage of sounds because the take off and deceleration sound awesome but the mid range isn't any different really. Also I may have some samples for a rev limiter if you would like to give it a shot.

And the program won't run on my computer so it looks like I won't be doing 125's.

[Ballsfalsky]

maybe use the top end sounds of your sounds, with the mid of JLV's? I think that would sound good.

[760Liam]

This sounds like my lawn mower...