MX Simulator

Is there a way to get erode that lowers over time? Say I'm riding with a low amount of people, I want the first few laps to dig down deep (1.0-2.0) but after that it just gets choppy enough it has no flow so I'd want it to progressively get less aggressive. Maybe set up another part in the command bar like "server,erode 1.0 0.05" where every minute it drops 0.05 until it reaches zero. Is this something anyone else would want?

Nothing does that now. It has been requested a lot though. I've been hesitant to do it since it wouldn't be based on any real phenomena.

Would that not simulate compaction to an extent?

No, if it were time based the track would harden even with no one riding on it.

The track gets harder overtime because it dries out, but this does not happen on sand

That's a decent rationale. Although doing it over the course of a moto is probably exaggerating it a lot.

Still comes back to what Chex asked for long ago. A 'loam' layer then harder dirt underneath. Right now we have nothing simulating tillage.

To be fair, gearing your 250 to stock gearing and being able to hit 50mph in 1st gear is also not based on any real bike, or shifting through all the gears in 2 tenths of a second. I think the game could really really benefit from this, like watching rF nationals now and seeing a rut end up getting 5 feet taller than where it started over the course of 1 moto is a little ridiculous.

The gear ratios are accurate. I'd guess at the redline you'd be around 35 MPH in first and 70 MPH in top gear. 50 feet/second is about 35 miles/hour so if you have togglespeed on it should show around 50 feet/second wound out in first.

Could you achieve a similar affect by just having a cap for erode height/depth? Say erode hits the max depth and cant get deeper but the rut shape/angle could still change. idk just spitballin'

Ktmrdr11 wrote: ↑Thu Nov 24, 2022 3:21 am Could you achieve a similar affect by just having a cap for erode height/depth? Say erode hits the max depth and cant get deeper but the rut shape/angle could still change. idk just spitballin'

You can already set depth limits. I don't think it works that well though. I guess I might have to add another map that just has the number of times it's been ridden over.