YOUR SETUP
Re: YOUR SETUP
does anybody have a deccent sx setup they could share with me, thanks in advance cuz im really struggling to find a somewhat deccent setup
-
- Village Idiot
- Posts: 1878
- Joined: Sat Feb 04, 2012 10:39 pm
- Team: Tegridy Farms
- Location: Kansas
Re: YOUR SETUP
250 or 450?C.K.234 wrote:does anybody have a deccent sx setup they could share with me, thanks in advance cuz im really struggling to find a somewhat deccent setup
Re: YOUR SETUP
250 plsKaseoDip wrote:250 or 450?C.K.234 wrote:does anybody have a deccent sx setup they could share with me, thanks in advance cuz im really struggling to find a somewhat deccent setup
-
- Village Idiot
- Posts: 1878
- Joined: Sat Feb 04, 2012 10:39 pm
- Team: Tegridy Farms
- Location: Kansas
Re: YOUR SETUP
Sorry, I don't ride 250s.C.K.234 wrote:250 pls
Here's a 450 if you or anyone needs one.
Re: YOUR SETUP
thanks tho
Re: YOUR SETUP
Hi guys, im looking for a stability that could help me be more consistent/faster. If you don't have a stability setup, do you have maybe some tips? Thanks
-
- Posts: 8368
- Joined: Thu Nov 19, 2009 5:52 am
- Team: Havoc Racing
- Contact:
Re: YOUR SETUP
Start with a stability of 30 or so. Ride for a while. Lower your stability 5 points at a time until you can't stay up. The more hours in a row i get in, the lower i set stability.
jlv wrote:If it weren't for Havoc I'd have been arguing with the 12 year olds by myself.
-
- Posts: 4
- Joined: Sun Jul 23, 2017 8:35 pm
- Team: Privateer
- Location: perris, california
Re: YOUR SETUP
Everything i keep the same but each bike the gearing changes. This is for the 17 ktm350. I ride in first person. just need some more tuning on suspension but its working for now for the way i play
SUSPENSION FRONT
Fork HS Compression Damping:92
Fork LS Compression Damping:65
Fork HS Rebound Damping:92
Fork LS Rebound Damping:84
Fork Spring Rate:25
Fork Preload:100
Fork Oil Level:92
SUSPENSION REAR
Shock HS Compression Damping:90
Shock LS Compression Damping:74
Shock HS Rebound Damping:85
Shock LS Rebound Damping:91
Shock Spring Rate:10
Shock Preload:100
GEARING
CounterShaft Sprocket:-1
Rear Sprocket:0
RIDER MOTION
Rider Vertical Spring:89
Rider Vertical Damping:51
RIDER MOTION
Rider Forward Spring:91
Rider Forward Damping:31
RIDER WEIGHT
Rider Mass Distribution:0.33
ADVANCED STABILITY
Leveling:25
Roll Damping:37
Roll Limit Angle:140
Roll Limit Factor:20
Steering Damping:20
Steering Strength:90
Max Steering Force:730
Direct Steering:1
Slow Damping Speed:40
Slow Damping Factor:1.75
Landing Damping Falloff:0.13
Landing Damping Factor:2.25
Full Lock Speed:10
Restricted Lock Speed:50
Restricted Lock Angle:5
SUSPENSION FRONT
Fork HS Compression Damping:92
Fork LS Compression Damping:65
Fork HS Rebound Damping:92
Fork LS Rebound Damping:84
Fork Spring Rate:25
Fork Preload:100
Fork Oil Level:92
SUSPENSION REAR
Shock HS Compression Damping:90
Shock LS Compression Damping:74
Shock HS Rebound Damping:85
Shock LS Rebound Damping:91
Shock Spring Rate:10
Shock Preload:100
GEARING
CounterShaft Sprocket:-1
Rear Sprocket:0
RIDER MOTION
Rider Vertical Spring:89
Rider Vertical Damping:51
RIDER MOTION
Rider Forward Spring:91
Rider Forward Damping:31
RIDER WEIGHT
Rider Mass Distribution:0.33
ADVANCED STABILITY
Leveling:25
Roll Damping:37
Roll Limit Angle:140
Roll Limit Factor:20
Steering Damping:20
Steering Strength:90
Max Steering Force:730
Direct Steering:1
Slow Damping Speed:40
Slow Damping Factor:1.75
Landing Damping Falloff:0.13
Landing Damping Factor:2.25
Full Lock Speed:10
Restricted Lock Speed:50
Restricted Lock Angle:5
-
- Posts: 28
- Joined: Wed Jul 26, 2017 2:12 am
- Team: Goon wagon racing
Re: YOUR SETUP
What can I do so my setup stops bouncing in rough stuff, which causes me to start swapping if it gets bad
-
- Posts: 8368
- Joined: Thu Nov 19, 2009 5:52 am
- Team: Havoc Racing
- Contact:
Re: YOUR SETUP
Add 5 clicks more on high-speed rebound on both ends at a time until it feels better. Maybe softer springs, but never adjust too much at once.
jlv wrote:If it weren't for Havoc I'd have been arguing with the 12 year olds by myself.
-
- Posts: 28
- Joined: Wed Jul 26, 2017 2:12 am
- Team: Goon wagon racing
Re: YOUR SETUP
I got it to stop swapping but now the rear just springs up fast every time i hit a bump, and sometimes it literally will make me endo from bouncing so bad
TeamHavocRacing wrote: ↑Mon Nov 09, 2020 4:51 pm Add 5 clicks more on high-speed rebound on both ends at a time until it feels better. Maybe softer springs, but never adjust too much at once.
-
- Posts: 8368
- Joined: Thu Nov 19, 2009 5:52 am
- Team: Havoc Racing
- Contact:
Re: YOUR SETUP
Increasing high speed rebound damping should reduce the forks and/or swingarm from bouncing back into position as quickly, reducing kick. If you can't fix it, try some of the setups provided here and go back a few pages to see if any of them work for you... http://forum.mxsimulator.com/viewtopic. ... &start=765ajsideways52 wrote: ↑Mon Nov 09, 2020 9:31 pm...but now the rear just springs up fast every time i hit a bump...
jlv wrote:If it weren't for Havoc I'd have been arguing with the 12 year olds by myself.
Re: YOUR SETUP
anyone got a good 250 sx suspension that i could use?
-
- Posts: 324
- Joined: Thu May 25, 2017 3:20 pm
- Team: Boots House
- Location: United States
- Contact:
-
- Posts: 1611
- Joined: Sun Nov 04, 2012 2:25 am
- Team: Phil's
- Location: Vancouver Island
- Contact:
Re: YOUR SETUP
I miss back in the day reading through this thread and seeing all the cool unique advanced stabilities people have created. Nowadays looking through here all I see 9 times outta 10 are stabilities i've made that have been passed around lmfao
Tanner Rogers