MXS Only Using 0.1 Mbps?

Post your questions here
Post Reply
Robert196
Posts: 3408
Joined: Fri Sep 23, 2011 2:50 pm
Location: 192.168. 1.1

MXS Only Using 0.1 Mbps?

Post by Robert196 »

Well to say it real quick my internet isnt the best by any means, only 3 down. I am just curious to why MXS only uses 0.1 Mbps instead of all available internet? As you can see in this picture below, I was downloading the new NVIDIA driver while watching the RF Amateur races and noticed MXS takes the same amount of internet as Teamspeak. TS even shoots up to 3.0 every once and a while but sim stays at the same. Did another test where sim is the only program open and still the same thing.

Image

So the question Is there any way to make sim use the available internet to get less lag? Or will it not effect the lag since it is ping related? Dont know much about networking so just want to figure out.
| 2013 MotoOption Supercross 250 Eastside Champion | #turnbarcrew |
jlv
Site Admin
Posts: 15388
Joined: Fri Nov 02, 2007 5:39 am
Team: No Frills Racing
Contact:

Re: MXS Only Using 0.1 Mbps?

Post by jlv »

It only needs enough to send player states which are about 50 bytes per player. It sends 32 updates per second. It could send 128 per second to get rid of about 16 ms of lag on average but it'd be a waste of bandwidth.
Josh Vanderhoof
Sole Proprietor
jlv@mxsimulator.com
If you email, put "MX Simulator" in the subject to make sure it gets through my spam filter.
Robert196
Posts: 3408
Joined: Fri Sep 23, 2011 2:50 pm
Location: 192.168. 1.1

Re: MXS Only Using 0.1 Mbps?

Post by Robert196 »

Ahh i see. Thanks for the quick reply JLV.
| 2013 MotoOption Supercross 250 Eastside Champion | #turnbarcrew |
Post Reply