Upcoming Skins and Shader Maps #2

Pottsy · Post by **Pottsy** » Mon Sep 21, 2015 8:53 pm

Motolife_99 wrote:

I actually like what you changed in that top picture. What i would try though is bring the lines in a little more towards the middle of the 9 and then connect the black lines. But if that looks to funky, try connect them further towards the edge of the nine, further out than in this pic you posted.

JakeT3 · Post by **JakeT3** » Tue Sep 22, 2015 7:38 am

Motolife_99 wrote:
Pumaxcs wrote:Why aren't you listening?
I already done this
Andy_Hack wrote:Select the 99, then put a white stroke around it, rastersize it and put a black stroke around it. done.

JakeT3 wrote:By removing it.
This is of no help whatsoever.

I actually think it looks better without that much white on the left 9. U asked how to finish it off and I gave my opinion

Motolife_99 · Post by **Motolife_99** » Tue Sep 22, 2015 12:54 pm

JakeT3 wrote:I actually think it looks better without that much white on the left 9. U asked how to finish it off and I gave my opinion

I read your message wrong, you weren't exactly very clear lol

ivan559 · Post by **ivan559** » Wed Sep 23, 2015 11:55 am

TM_Infidel wrote:WIP

OMG i love it !! GORGEOUS !!!

MaicoBreako · Post by **MaicoBreako** » Thu Sep 24, 2015 12:10 am

Planning on releasing most of the 2016 100% colorways (Racecraft and Accuri) for the 6D's. I did a couple today, and I need some advice.
1. Can I make the lenses have a more "mirrored" effect?
2. For the complex patterns like the Paradise graphic, how do I replicate it on the template? For the Legacy and Alchemy I used the magic wand to cut out the dots on the strap and resized them to fit the template. Will that work for frame graphics?
Accuri Passion, I think this is my favorite one, the lens looks the most realistic, I just wish it had a little more shine to it.

Derestricted

Solar, the lens looks awful on this one...

Airstream, I want more of a transparent grey on the frame on this one, but I don't know if that is possible.

Alchemy, I need to resize the dots, and then I will recolor it to make the Legacy design. (Bad FOV)

I'm also planning on making an FMF Titanium Powercore 2.1 for the Yamaha two strokes and KTM/Huskys. I just need to make the sticker, which should be fairly simple.

John23 · Post by **John23** » Thu Sep 24, 2015 12:42 am

MaicoBreako wrote:Planning on releasing most of the 2016 100% colorways (Racecraft and Accuri) for the 6D's. I did a couple today, and I need some advice.
1. Can I make the lenses have a more "mirrored" effect?
2. For the complex patterns like the Paradise graphic, how do I replicate it on the template? For the Legacy and Alchemy I used the magic wand to cut out the dots on the strap and resized them to fit the template. Will that work for frame graphics?
Accuri Passion, I think this is my favorite one, the lens looks the most realistic, I just wish it had a little more shine to it.

Derestricted

Solar, the lens looks awful on this one...

Airstream, I want more of a transparent grey on the frame on this one, but I don't know if that is possible.

Alchemy, I need to resize the dots, and then I will recolor it to make the Legacy design. (Bad FOV)

I'm also planning on making an FMF Titanium Powercore 2.1 for the Yamaha two strokes and KTM/Huskys. I just need to make the sticker, which should be fairly simple.

Turn your reflections on in the graphics, and if it is still happening, adjust the spec map to be a little brighter on the lens

MaicoBreako · Post by **MaicoBreako** » Thu Sep 24, 2015 12:44 am

Thanks, I will try that!

John23 · Post by **John23** » Thu Sep 24, 2015 12:44 am

MaicoBreako wrote:Thanks, I will try that!

And the pipe looks dope! I will definitely use the goggles if/when you release them.

MaicoBreako · Post by **MaicoBreako** » Thu Sep 24, 2015 1:38 am

John23 wrote:
MaicoBreako wrote:Thanks, I will try that!
And the pipe looks dope! I will definitely use the goggles if/when you release them.

Thanks! I will definitely release the goggles when I finish them, which hopefully will be soon.

GregDearman · Post by **GregDearman** » Thu Sep 24, 2015 6:49 am

I edited the lense materials on mine in blender and they came out really well

JakeT3 · Post by **JakeT3** » Thu Sep 24, 2015 1:17 pm

Sexiest yamaha 4 strokes

Gonna create some sick gear from the 2010-2011 area aswell

nickuzick · Post by **nickuzick** » Fri Sep 25, 2015 12:19 pm

Barpad will change but this is a new kit I have been working on. I'm planning a public release if all goes to plan.

nickuzick · Post by **nickuzick** » Fri Sep 25, 2015 6:15 pm

I'll need to change the FMF logos

Figured out how to do holographic logos and wanted to use them on this.

MaicoBreako · Post by **MaicoBreako** » Fri Sep 25, 2015 7:06 pm

nickuzick wrote:I'll need to change the FMF logos Figured out how to do holographic logos and wanted to use them on this.

Wwwwwooooooowwwwwww!!!! Those forks are <3. That looks fantastic, please do release it!

Five5One Designs · Post by **Five5One Designs** » Sat Sep 26, 2015 12:43 am

Fox Flexair LE MXON USA tops nearly finished will be releasing over next couple of days once finished hopefully, was trying to get this done for the weekend for all my American friends

other IRL things came first

sorry for the pic was just quick to show progress so far

Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2

Re: Upcoming Skins and Shader Maps #2