Timing Gates: Start Gates and Checkpoints
-
- Posts: 4891
- Joined: Sun Jan 13, 2008 5:22 am
- Team: Privateer
- Location: Southern Vermont
- Contact:
Timing Gates: Start Gates and Checkpoints
Confuse me.
I went through my new track, and placed all the checkpoints in, 0-23, the rest I did not need. So I close out, reopen and they are still there. Good, I got checkpoints to work.
Now, I go back into MX Sim, write the coordinates down for the starting gates, and use the calculation from here to get the placement. So, I paste the gates into the 'startinggate' portion of the timing_gates file, and Reload the track. Now, the starting gates are there, but the checkpoints are nowhere to be found, the 30 second guy is gone, and I've been screwed to the moon and back.
http://s78.photobucket.com/albums/j102/ ... hecode.jpg
That's the code for the timing_gates file.
I went through my new track, and placed all the checkpoints in, 0-23, the rest I did not need. So I close out, reopen and they are still there. Good, I got checkpoints to work.
Now, I go back into MX Sim, write the coordinates down for the starting gates, and use the calculation from here to get the placement. So, I paste the gates into the 'startinggate' portion of the timing_gates file, and Reload the track. Now, the starting gates are there, but the checkpoints are nowhere to be found, the 30 second guy is gone, and I've been screwed to the moon and back.
http://s78.photobucket.com/albums/j102/ ... hecode.jpg
That's the code for the timing_gates file.
Last edited by Voutare on Mon Feb 18, 2008 8:53 pm, edited 3 times in total.
Re: Timing Gates: Start Gates and Checkpoints
What text editor are you using?
-
- Posts: 61
- Joined: Sun Dec 02, 2007 4:21 pm
Re: Timing Gates: Start Gates and Checkpoints
Your pic looks like your checkpoints are all mixed but thats because you use notepad of xp , so i think is better you use other text program or find a setting on xp notepad to dont show all that mixed and with some wierd simbols , i remenber JLV told 2 or 3 text programs some time ago , as you see your text now is very hard set something by hand without make mistakes , is better see line by line with other programs.
try this or other:
Notepad++ 4.7.5
http://www.download.com/Notepad-/3000-2 ... ?tag=lst-1
try this or other:
Notepad++ 4.7.5
http://www.download.com/Notepad-/3000-2 ... ?tag=lst-1
jlv wrote:A program for editing text, like emacs or vi. Even notepad or wordpad might work.
Last edited by VRT_JPRLisbon_ on Mon Feb 18, 2008 5:26 am, edited 1 time in total.
-
- Posts: 61
- Joined: Sun Dec 02, 2007 4:21 pm
Re: Timing Gates: Start Gates and Checkpoints
firstlap:
0 1 2 3 4 5 6 7 8 100009
normallap:
10 11 12 13 14 1 2 3 4 5 6 7 8 100009
What means the number 100009 on timing_gates file JLV ?
Im doing sandiego sx.
Thanks.
0 1 2 3 4 5 6 7 8 100009
normallap:
10 11 12 13 14 1 2 3 4 5 6 7 8 100009
What means the number 100009 on timing_gates file JLV ?
Im doing sandiego sx.
Thanks.
Re: Timing Gates: Start Gates and Checkpoints
Adding 100000 to the gate number makes the computer riders join the next two sections into one. You normally want to do this when the gate is in a bad place to change lines, like in mid air.
-
- Posts: 1421
- Joined: Thu Dec 13, 2007 12:41 am
- Team: Privateer
- Location: West Kentucky, USA
Re: Timing Gates: Start Gates and Checkpoints
if your finish line gate is say 15 then you want that number to be 100015 or 10015 i cant remember how many zeros but i played around with it and i think this is the best way. I had this same question in a private message not to long ago
D.Eckels #421 "The O-G"
-
- Posts: 4891
- Joined: Sun Jan 13, 2008 5:22 am
- Team: Privateer
- Location: Southern Vermont
- Contact:
Re: Timing Gates: Start Gates and Checkpoints
VRT_JPRLisbon_ wrote:firstlap:
0 1 2 3 4 5 6 7 8 100009
normallap:
10 11 12 13 14 1 2 3 4 5 6 7 8 100009
What means the number 100009 on timing_gates file JLV ?
Im doing sandiego sx.
Thanks.
And the "0 1 2 3 4 5 6" and so on, means those are the gates that the riders must go through?
For instance, on my track the 0 is before where the start connects to the actual track (similar to Eskwanbee), so that is a gate that would only be found in the firstlap part?
That's what my track looks like.
So, should it look like this?
Code: Select all
firstlap:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 21 22 23 24 25 100025
normallap:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 21 22 23 24 25 100025
Alright, I think I've got it working now.
However, now I have a new problem. Right off the gate, everyone collides with each other and crashes. I'm thinking it has to do with how close 0 is to the gate, so maybe having a double gate thing would work there.
EDIT2:
Now nothing works.
I'm going to take a break from this for a while.
Re: Timing Gates: Start Gates and Checkpoints
I don't think gate 0 is necessary, since there isn't any way to cut the track from there to gate 1. I would probably move gate 0 to the landing of the finish double to make sure it's not possible to jump off the side and cut the track. Also you have 20 and 25 in there twice, 21 is missing and 22 and 23 are in the wrong order. That leaves you with this:
firstlap:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 23 22 24 25
normallap:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 23 22 24 25
It usually helps the computer riders if you join the sections where the area surrounding the gate isn't smooth. So 4, 7, 9, 11, 12, 15, 16, 17, 18, 19, 20, 23, 22 and 25 should be joined:
firstlap:
1 2 3 100004 5 6 100007 8 9 10 100011 100012 13 14 100015 100016 100017 100018 100019 100020 21 100023 100022 24 100025
normallap:
1 2 3 100004 5 6 100007 8 9 10 100011 100012 13 14 100015 100016 100017 100018 100019 100020 21 100023 100022 24 100025
Also, I think it works best if you put the gate at the corner entry. I haven't tested it extensively but it seems better to not have the lines be split in the middle of the corner.
firstlap:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 23 22 24 25
normallap:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 23 22 24 25
It usually helps the computer riders if you join the sections where the area surrounding the gate isn't smooth. So 4, 7, 9, 11, 12, 15, 16, 17, 18, 19, 20, 23, 22 and 25 should be joined:
firstlap:
1 2 3 100004 5 6 100007 8 9 10 100011 100012 13 14 100015 100016 100017 100018 100019 100020 21 100023 100022 24 100025
normallap:
1 2 3 100004 5 6 100007 8 9 10 100011 100012 13 14 100015 100016 100017 100018 100019 100020 21 100023 100022 24 100025
Also, I think it works best if you put the gate at the corner entry. I haven't tested it extensively but it seems better to not have the lines be split in the middle of the corner.
-
- Posts: 4891
- Joined: Sun Jan 13, 2008 5:22 am
- Team: Privateer
- Location: Southern Vermont
- Contact:
Re: Timing Gates: Start Gates and Checkpoints
That seems to work better, with having half the gate on the track, it makes the AI seem to follow the track better.
I've got a pretty big problem though.
Between checkpoints 12 and 13 they always seem to stop. No matter what, I've tried moving the gates, I've tried just running a million laps, to see if they follow and they sit there like it was the end of the race.
EDIT:
I deleted 12 and 13, hoping that would fix the problem, but no. Now the AI keeps stopping at 5.
...
JLV, enlighten me, please.
This is what the timing gates look like now.
I've got a pretty big problem though.
Between checkpoints 12 and 13 they always seem to stop. No matter what, I've tried moving the gates, I've tried just running a million laps, to see if they follow and they sit there like it was the end of the race.
EDIT:
I deleted 12 and 13, hoping that would fix the problem, but no. Now the AI keeps stopping at 5.
...
JLV, enlighten me, please.
This is what the timing gates look like now.
Re: Timing Gates: Start Gates and Checkpoints
Have you made a clean first lap? There are separate lines for the first lap so it won't work until they see you get through that section without falling on your first lap.
-
- Posts: 4891
- Joined: Sun Jan 13, 2008 5:22 am
- Team: Privateer
- Location: Southern Vermont
- Contact:
Re: Timing Gates: Start Gates and Checkpoints
Ok, it's fixed now.
I get it. Yeah, that makes a lot of sense now.
And, for the start, they still all swing over to the left, but I am going to guess that I need to do a full lap for every single one of the gates, for it to make the AI not drift way over to the left?
It looks like a car race. They start in a line, and after about 20 feet slide over and try to go in one path. It's quite funny, actually.
EDIT:
Ok, everything is now working fine.
Everything exept I am running 1:30's and the AI are running 3:20's. Gah.
And it CTD's when I have editor and nosound on.
I get it. Yeah, that makes a lot of sense now.
And, for the start, they still all swing over to the left, but I am going to guess that I need to do a full lap for every single one of the gates, for it to make the AI not drift way over to the left?
It looks like a car race. They start in a line, and after about 20 feet slide over and try to go in one path. It's quite funny, actually.
EDIT:
Ok, everything is now working fine.
Everything exept I am running 1:30's and the AI are running 3:20's. Gah.
And it CTD's when I have editor and nosound on.
Re: Timing Gates: Start Gates and Checkpoints
got a few quick questions in relation to AI/checkpoints:
1. occasionally when riding around my track, the game seems to totally freeze when i get to a particular checkpoint, why would you imagine this is happening?
2. I'm having a few issues getting the AI to do the track, i have put in multiple clean first laps, yet when they get to a particular checkpoint on the first lap they simply stop, what am i doing wrong?
thanks for any help, the answer is probably obvious, but im new to this whole tracks thing...
1. occasionally when riding around my track, the game seems to totally freeze when i get to a particular checkpoint, why would you imagine this is happening?
2. I'm having a few issues getting the AI to do the track, i have put in multiple clean first laps, yet when they get to a particular checkpoint on the first lap they simply stop, what am i doing wrong?
thanks for any help, the answer is probably obvious, but im new to this whole tracks thing...
firstlap:
0 1 2 3 10004 10005 6 100013 100014 8 9 100010
normallap:
10 11 12 0 1 2 3 10004 10005 6 100013 100014 8 9 100010
instupitious.
-
- Posts: 505
- Joined: Thu Jan 10, 2008 2:02 am
- Team: Privateer
Re: Timing Gates: Start Gates and Checkpoints
Well first, gates 4 and 5 should have an extra zero in them: 100004 instead of 10004. And you have gate 10 listed twice for a normal lap. I think I would change them to this:gordy wrote:firstlap:
0 1 2 3 10004 10005 6 100013 100014 8 9 100010
normallap:
10 11 12 0 1 2 3 10004 10005 6 100013 100014 8 9 100010
Code: Select all
0 1 2 3 100004 100005 6 100013 100014 8 9 100010
normallap:
11 12 0 1 2 3 100004 100005 6 100013 100014 8 9 100010
#189
"This game will always be about pushing it right to the edge without going over .... to keep up with the top riders you will still have to be right on the edge of control." - jlv
"This game will always be about pushing it right to the edge without going over .... to keep up with the top riders you will still have to be right on the edge of control." - jlv
Re: Timing Gates: Start Gates and Checkpoints
If you guys have a track that locks up the game, send it to me so I can fix the bug.