MXS Twitter

Phathry25 · Post by **Phathry25** » Fri Jun 28, 2013 6:06 am

I had the same thought process Nate. ITS NOT WORTH IT!!!!

Phathry25 · Post by **Phathry25** » Fri Jun 28, 2013 6:07 am

Three new pages in a row, that's gotta be some kind of record.

Sweendoggy · Post by **Sweendoggy** » Fri Jun 28, 2013 6:17 am

jlv wrote:
TeamHavocRacing wrote:
jlv wrote:...with aluminum I usually break it.
It's impossible to tell how far or how many times a lever can bend! I've seen some pretty funny lever bends you couldn't duplicate. Like snail-shell shapes. Put a cheater on it and *snap*.
Looks easy enough. Not sure why I have trouble...

Also, if you wanna spend 40 bucks, I bet this has your answer in it hahaha http://link.springer.com/article/10.1007%2FBF02648507 Also on lever bends take into account the "impact" and "shock" to the lever, not like you are slowly moving around the micro-structure like when bending by hand.

Sweendoggy · Post by **Sweendoggy** » Fri Jun 28, 2013 6:21 am

Sweendoggy wrote: http://link.springer.com/article/10.1007%2FBF02648507

Derp, spoke too soon, that would help, but not what we want! oh the joys of Journal articles, I miss getting them for free through school, because 9 times out of ten after opening them, they aren't what I'm looking for

Post by **jlv** » Fri Jun 28, 2013 11:12 pm

I just want to lower my shifter a notch and now I have to read "Plastic work of fatigue crack propagation in steels and aluminum alloys"? Damn you KTM!

Stormz · Post by **Stormz** » Fri Jun 28, 2013 11:19 pm

jlv wrote:I just want to lower my shifter a notch and now I have to read "Plastic work of fatigue crack propagation in steels and aluminum alloys"? Damn you KTM!

Engineers...they take it so seriously.

Robert196 · Post by **Robert196** » Sat Jun 29, 2013 1:32 am

Sweendoggy · Post by **Sweendoggy** » Sat Jun 29, 2013 2:36 am

jlv wrote:I just want to lower my shifter a notch and now I have to read "Plastic work of fatigue crack propagation in steels and aluminum alloys"? Damn you KTM!

Lol no only if you want to understand why aluminum bends like shiet!!!! And storms an engineer would have had that's hit bent and ready to go by now!!! Lol

Stormz · Post by **Stormz** » Sat Jun 29, 2013 3:25 am

Sweendoggy wrote:
jlv wrote:I just want to lower my shifter a notch and now I have to read "Plastic work of fatigue crack propagation in steels and aluminum alloys"? Damn you KTM!
Lol no only if you want to understand why aluminum bends like shiet!!!! And storms an engineer would have had that's hit bent and ready to go by now!!! Lol

No, that's a machinist.

An engineer tells you what it *should* do under certain circumstances. A machinist goes out and does what the engineer can only imagine.

TH_722 · Post by **TH_722** » Sat Jun 29, 2013 4:45 am

http://www.vitalmx.com/videos/features/ ... elmo,16138
this made me wanna ride so bad

Sweendoggy · Post by **Sweendoggy** » Sat Jun 29, 2013 5:47 am

Stormz wrote:
Sweendoggy wrote:
jlv wrote:I just want to lower my shifter a notch and now I have to read "Plastic work of fatigue crack propagation in steels and aluminum alloys"? Damn you KTM!
Lol no only if you want to understand why aluminum bends like shiet!!!! And storms an engineer would have had that's hit bent and ready to go by now!!! Lol
No, that's a machinist.

An engineer tells you what it *should* do under certain circumstances. A machinist goes out and does what the engineer can only imagine.

No, Machinists would be standing around bullshitting about random shit, drinking their coffee, and bitching about engineers, meanwhile Engineers got shit done during that time

yzmxer608 · Post by **yzmxer608** » Sat Jun 29, 2013 9:37 am

Phathry25 wrote:I had the same thought process Nate. ITS NOT WORTH IT!!!!

I went against what everyone has said and watched it. Really had no idea what the movie was about, and lets just say it wasn't what I thought it'd be...

Ohagan75 · Post by **Ohagan75** » Sat Jun 29, 2013 9:55 am

yzmxer608 wrote:
Phathry25 wrote:I had the same thought process Nate. ITS NOT WORTH IT!!!!
I went against what everyone has said and watched it. Really had no idea what the movie was about, and lets just say it wasn't what I thought it'd be...

i thought it would just be about 4 girls going on spring break and partying. next thing it's drugs and shooting people and shit. i was like wtf is this?

Stormz · Post by **Stormz** » Sat Jun 29, 2013 2:02 pm

Sweendoggy wrote:
Stormz wrote:
No, that's a machinist.

An engineer tells you what it *should* do under certain circumstances. A machinist goes out and does what the engineer can only imagine.
No, Machinists would be standing around bullshitting about random shit, drinking their coffee, and bitching about engineers, meanwhile Engineers got shit done during that time

Damn you're good Haha.

Stormz · Post by **Stormz** » Sat Jun 29, 2013 6:53 pm

Got home from being out of town for work last night after a week of hotel life. She made chocolate chip cookies and fresh southern style lemonade. She said I could either have that or sex.

Damn those were some good cookies.

MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter

Re: MXS Twitter